Line Drivers
CVEQ Series
SPECIFICATIONS
Video
Gain |
|
CVEQ1 AAP, CVEQ1 WM | |
CVEQ 100 Series | Composite video and Y of |
| C of |
Equalization |
|
CVEQ1 AAP, CVEQ1 WM | 4.5 dB max. @ 8 MHz |
CVEQ 100 Series | 0 dB to +7 dB (x1 to x2) at 5 MHz, adjustable |
Bandwidth (Y of | 185 MHz |
Differential phase error |
|
(CVEQ1 AAP, CVEQ1 WM) | 1º at 3.58 MHz |
Differential gain error |
|
(CVEQ1 AAP, CVEQ1 WM) | 0.07% at 3.58 MHz |
Output cable driving distance |
|
(CVEQ 100 Series) | Up to 1000’ (300 m) with Extron MHR cable |
Video input |
|
Number/signal type | 1 composite video |
Connectors |
|
CVEQ1 AAP, CVEQ1 WM, |
|
CVEQ 100 | 1 female BNC |
CVEQ 100 D | 1 female RCA |
Nominal level | 1 |
Minimum/maximum levels |
|
CVEQ1 AAP, CVEQ1 WM | Analog: 0.3 V to 2.0 |
CVEQ 100, CVEQ 100 D | 0.4 to 2.0 |
Impedance | 75 ohms |
Return loss |
|
CVEQ1 AAP, CVEQ1 WM | |
CVEQ 100 Series | |
DC offset (max. allowable) | 4.0 V |
Input coupling | AC |
Video output |
|
Number/signal type | 1 equalized composite video |
Connectors | 1 female BNC |
Nominal level | 1 |
Minimum/maximum levels |
|
CVEQ1 AAP, CVEQ1 WM | 0.3 V to 2.0 |
CVEQ 100 Series | 0.4 to 2.0 |
Impedance | 75 ohms |
Return loss | |
DC offset |
|
CVEQ1 AAP, CVEQ1 WM | ±50 mV with input at 0 offset |
CVEQ 100 Series | ±5 mV with no input signal |
| Floating: +0.1 to |
Sync |
|
Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
Audio |
|
Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response |
|
CVEQ1 AAP, CVEQ1 WM | 20 Hz to 20 kHz, ±0.5 dB |
CVEQ 100 Series | 20 Hz to 20 kHz, +0.05 dB, |
THD + Noise |
|
CVEQ1 AAP, CVEQ1 WM | 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level |
CVEQ 100 Series | 0.015% @ 1 kHz at nominal level |
S/N |
|
CVEQ1 AAP, CVEQ1 WM | >86 dB at output 6 dB, balanced |
CVEQ 100 Series | >100 dB at maximum output (unweighted) |
Stereo channel separation |
|
CVEQ1 AAP, CVEQ1 WM | >75 dB @ 20 Hz to 20 kHz |
CVEQ 100 Series | >80 dB @ 1 kHz |
Output cable driving distance |
|
(CVEQ 100 Series) | Up to 1000’ (300 m) with Extron |
Audio input |
|
Number/signal type | 1 stereo unbalanced |
Connectors | 2 RCA female |
Impedance |
|
CVEQ1 AAP, CVEQ1 WM | >10k ohms unbalanced, DC coupled |
CVEQ 100 Series | 20k ohms unbalanced, DC coupled |
Nominal level | |
Maximum level |
|
CVEQ1 AAP, CVEQ1 WM | +6 dBV, balanced at 1% THD+N |
CVEQ 100 Series | +8 dBV (2.5 V), unbalanced at 1% THD+N |
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type |
|
CVEQ1 AAP, CVEQ1 WM, |
|
CVEQ 100 | 1 stereo, balanced/unbalanced |
CVEQ 100 D | 1 stereo or dual mono |
Connectors |
|
CVEQ1, CVEQ 100 Series | (1) 3.5 mm captive screw connector, 5 pole |
CVEQ1 AAP | (1) 3.5 mm direct insertion captive screw connector, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Nominal level |
|
CVEQ1 AAP, CVEQ1 WM | |
CVEQ 100 Series | |
Maximum level |
|
CVEQ1 AAP, CVEQ1 WM |
|
Maximum level | >+16 dBu, balanced at 1% THD+N |
Maximum level (600 ohm) | >+9 dBm, balanced at 1% THD+N |
CVEQ 100 Series | +9 dBV (2.8 V) unbalanced, +17 dBu (5.6 V) balanced at 1% THD+N with a 10k |
| ohm load |
General |
|
External power supply | 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A (max.), |
| regulated |
Power input requirements |
|
CVEQ1 AAP, CVEQ1 WM | 12 VDC, 0.4 A |
CVEQ 100 Series | 12 VDC, 0.2 A |
Temperature/humidity | Storage: |
| Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling | Convection, unvented |
Rack mount |
|
CVEQ 100 | Yes, with optional 1U rack shelf, part |
| rack shelf, part |
| part |
| Also furniture and projector mountable with optional mounting kits. |
All other models | No, but wall- and furniture mountable. |
Enclosure type |
|
CVEQ 100, CVEQ1 AAP, |
|
CVEQ1 WM | Metal |
CVEQ 100 D | Metal rear enclosure, plastic faceplate |
Enclosure dimensions |
|
CVEQ1 AAP |
|
Plate | 1.4” H x 3.5” W x 0.1” D |
| ( 2.8 cm H x 8.9 cm W x 0.3 cm D) |
| (double space high AAP plate) |
Circuit board | 1.1” H x 2.7” W x 1.7” D |
| (2.8 cm H x 6.9 cm W x 4.3 cm D) |
| (Height includes connectors, but not cables.) |
CVEQ1 WM |
|
Plate | 4.5” H x 2.8” W x 0.1” D |
| (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang) |
Circuit board | 2.7” H x 1.1” W x 1.7” D |
| (6.9 cm H x 2.8 cm W x 4.3 cm D) |
| (Width includes connectors, but not cables.) |
CVEQ 100 | 1.0” H x 4.3” W x 3.0” D (<1U high, quarter rack wide) |
| 2.5 cm H x 11.0 cm W x 7.6 cm D |
| (Depth excludes connectors. ) |
CVEQ 100 D |
|
Faceplate | 2.6” H* x 1.3” W x 0.1” D (6.6 cm H* x 3.3 cm W x 0.3 cm D) |
| (Fits the opening in a 1 gang Decora faceplate. *Height is 3.8” [9.7 cm] |
| including mounting tabs.) |
Device | 2.7” H x 1.8” W x 0.75” D (6.9 cm H x 4.6 cm W x 1.9 cm D) |
| (Depth excludes connectors, height excludes mounting tabs.) |
Product weight |
|
CVEQ1 AAP, CVEQ 100 D | 0.2 lbs (0.1 kg) |
CVEQ1 WM | 0.3 lbs (0.1 kg) |
CVEQ 100 | 0.7 lbs (0.3 kg) |
Shipping weight |
|
CVEQ 100 D, CVEQ1 AAP | 2 lbs (1 kg) |
CVEQ 100, CVEQ1 WM | 3 lbs (2 kg) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Listings | UL, CUL |
Compliances |
|
CVEQ1 AAP, CVEQ1 WM | CE, FCC Class A |
CVEQ 100 Series | CE, FCC Class A, VCCI, AS/NZS, ICES |
MTBF | 30,000 hours |
Warranty | 3 years parts and labor |
NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.
501
europe | Dubai | Asia | China | Japan |
+31.33.453.4040 / +800.3987.6673 | +971.4.2991800 | +65.6383.4400 / +800.7339.8766 | +86.21.3760.1568 / +400.883.1568 | +81.3.3511.7655 |
+31.33.453.4050 FAX | +971.4.2991880 FAX | +65.6383.4664 FAX | +86.21.3760.1566 FAX | +81.3.3511.7656 FAX |