Extron electronic DVI-RGB 150 specifications Video input and loop-through, Video output, Sync

Specifications — DVI-RGB 150 DVI Interface

Video

The DVI-RGB 150 converts a single link DVI signal to an analog RGB signal.

Using an adaptor (the Extron HDMI to DVI-D adapter, part #26-616-01), the DVI-RGB 150 can accept HDMI signals. It converts HDMI digital RGB signals, but does not support the HDMI digital component (YCrCb) signal format.

Video input and loop-through

Number/signal type	1 single link DVI-D digital video input
	1 single link DVI-D buffered loop-through
Connectors	1 DVI-D female (DVI input)
	1 DVI-D female (DVI loop through)
TMDS nominal level	0.4 V to 0.6 V swing
TMDS impedance	100 ohms
DC offset (max. allowable)	±0.5 V

Video output

Number/signal type	1 RGBHV, RGBS, RGsB
Connectors	6 BNC female
Nominal level	0.7 Vp-p for RGB
Level adjustment range	-3 dB to 6 dB (x0.7 to x2)
Peaking adjustment range	0 dB to 6 dB (x1 to x2) at 100 MHz
Impedance	75 ohms
Output resolution	Follows input, determined by the local DVI loop-through monitor or by the
	selector on this product.
Resolution selector resolutions and rates
	Setting	Resolution	Refresh Low Refresh High
	0	640x480	60 Hz	75 Hz
	1	800x600	60 Hz	75 Hz
	2	852x480	60 Hz	75 Hz
	3	1024x768	60 Hz	75 Hz
	4	1024x852	60 Hz	75 Hz
	5	1280x768	60 Hz	75 Hz
	6	1280x1024	60 Hz	75 Hz
	7	1365x768	60 Hz	75 Hz
	8	1366x768	60 Hz	75 Hz
	9	1400x1050	60 Hz	60 Hz
	A	1600x1200	60 Hz	60 Hz
	B	480p	60 Hz	60 Hz
	C	576p	50 Hz	50 Hz
	D	720p	50 Hz	60 Hz
	E	1080i	50 Hz	60 Hz
	F	1080p	50 Hz	60 Hz
Return loss	-35 dB @ 5 MHz
DC offset	±10 mV maximum with input at 0 offset
Output cable driving distance ...	150' (45 m) at 1600 x 1200 with Extron MHR cable
	250' (60 m) at 1024 x 768 with Extron MHR cable

Sync

Output type	RGBHV, RGBS, RGsB
Output level	TTL (5 Vp-p, unterminated)
Output impedance	75 ohms
Polarity	Positive or negative (follows input)

1-2DVI-RGB 150 DVI Interface • Specifications