Extron electronic IR 501 Presets, Mutes, View ties, N To view video and audio ties, skip step

Operations (Continued)

View ties

View a tie by input selection

1.Press the INPUT button to specify an input to view the tied output(s). The switcher’s Video LED and Audio LEDs light.

NTo view video and audio ties, skip step 2.

2.If desired, specify video-only or audio-only to view:

a. To view video-only tie(s), press the VIDEO button. The switcher’s Video LED remains lit and the Audio LED goes off.

b. To view audio-only tie(s), press the AUDIO button. The switcher’s Audio LED remains lit and the Video LED goes off.

3. Press the 5 button to select input 5. The switcher displays the

tied outputs as described in the switcher’s manual.

4.	Allow the switcher’s 5-second input and output button timeout to
	deselect the input.
View a tie by output selection
1.	Press the OUTPUT button to specify an output to view the tied
	input. The switcher’s Video LED lights and the Audio LED lights
	(or blinks if audio is broken away).

NTo view video and audio ties, skip step 2.

2.	If desired, specify video-only or audio-only to view:
	a.	To view video-only tie(s), press the VIDEO button. The
		switcher’s Video LED remains lit and the Audio LED goes
		off.
	b.	To view audio-only tie(s), press the AUDIO button. The
		switcher’s Audio LED remains lit and the Video LED goes
		off.
3.	Press the 3 button to select output 3. The switcher displays the
	tied input and other outputs tied to that input as described in the
	switcher’s manual.
4.	Allow the switcher’s 5-second input and output button timeout to
	deselect the output.

Presets

Save a preset
1.	Create all desired ties.
2.	Press the	SAVE	button to specify a save preset operation.
3.	Press the	PRESET	button to specify preset mode. The switcher’s

Preset LED blinks and, for preset numbers that are within the switcher’s total number of inputs and outputs, the Input or Output LEDs` associated with existing presets light.

NIf you save the current configuration to an existing preset, that preset’s configuration will be overwritten.

4.	Press the 5	button to select preset 5. The current configuration
	is saved as preset 5.
Recall a preset
1.	Press the PRESET button to specify preset mode. The switcher’s
	Preset LED lights and, for preset numbers that are within the
	switcher’s total number of inputs and outputs, the Input or
	Output LEDs associated with existing presets light.
2.	Press the 8	button to select preset 8. The ties that were

previously saved as preset 8 become the current configuration.

Mutes

Mute an output

1. Press the MUTE button to specify a mute operation.

NTo mute video and audio output, skip step to 3.

2. If desired, specify video-only or audio-only to mute:

a. To mute the video output, press the VIDEO button. The switcher’s Video LED remains lit and the Audio LED goes off.

b. To mute audio output, press the AUDIO button. The switcher’s Audio LED remains lit and the Video LED goes off.

3. Press only one I/O button ( 1 through 8 ). The switcher’s associated Output LED flashes on for a second.

NYou can mute multiple outputs, but you can only perform the mute operation on one output at a time.

6 IR 501 Small Matrix Remote Control • Operations IR 501 Small Matrix Remote Control • Operations 7