Extron electronic IRL 20 user manual AAppendix A, Specifications, Part Numbers, and Accessories

Installation and Operation, cont’d

2.Attach the black wire of an Extron IR Emitter to pin B (ground) and the white striped wire to pin D (IR signal) of a 3.5 mm captive screw connector, and plug it into the IRL 20’s remaining communications connector, as shown below. Two or three emitters can be wired to the same connector, if needed.

You can use one 5-pole connector to connect both the power input and the IR Emitter (IR output). It is not necessary to use two connectors.

3.Place the head of the IR Emitter near or in front of the IR pickup device of the IR-controllable Extron product

Striped

Only

External
power supply	Extron
(12 VDC, 1 A max.)
	IR Remote

Stand-alone IRL 20 with power

IRL 20

AAppendix A

Specifications, Part Numbers, and Accessories

Specifications

Included Parts

Accessories

Cables

2-6 IRL 20 • Installation and Operation