P/2 DA1 |
| P/2 DA2 PLUS |
|
|
|
|
|
|
P/2 DA1
Extron’s P/2 DA1, “The Peaker,” is an extremely small, one input, one buffered output VGA/SVGA/XGA/SXGA line driver. This DA drives a high resolution
P/2 DA1 provides amplification and peaking. This allows the video signal to be run long distances and produces a brighter and sharper image than normally possible. This is especially useful in the case of laptops, which often output a low power video signal. The
P/2 DA1 also restores low level sync voltages found on many lap- tops (as low as two volts) to normal TTL levels. This allows a lap- top to function with display devices and cable types it normally wouldn’t work with. The laptop’s ID bits are passed through to the display. The P/2 DA1 is housed in an
FEATURES
■Bandwidth – 300 MHz
■Compatibility – Compatible with VGA, SVGA, XGA, and SXGA graphic cards, monitors, and projectors as well as Macs with
■Input connector – Features a
■Output connectors – Features a
■ID bits – Laptop’s ID bits are passed through to the display.
■Gain and peaking –
■Power supply – A 110VAC,
■Part numbers
APPLICATION DIAGRAM
Power
Extron
VGA Cable
P/2 DA1
LCD Projector
Laptop Computer
P/2 DA2 PLUS
Extron’s P/2 DA2 PLUS is a one input, two buffered output, high resolution VGA/SXGA distribution amplifier. This DA drives a high resolution
FEATURES
■Bandwidth – 270 MHz
■Compatibility – Compatible with all modes/resolutions of VGA, SVGA, XGA, and SXGA graphic cards, monitors, and projectors.
■Input connector – Attached 4'
■Output connectors – Features
■ID bits – ID bits are routed to local monitor output.
■Power supply – A 110VAC,
■Part numbers
APPLICATION DIAGRAM
P/2 DA2 PLUS
Up to 250' w/ Extron
VGA Extension Cable
PC Computer | Projector |