Extron electronic MAC manual DA2 LC DA2 MT

P/2 DA2 LC P/2 DA2 MT

P/2 DA2 LC

Extron’s P/2 DA2 LC is a one input, two output, medium resolu- tion VGA/XGA distribution amplifier. This cost-effective DA drives a computer-video signal up to 100 feet through high-quality cable, such as Extron’s VGA cable.

FEATURES

■Bandwidth – 150 MHz (-3dB) RGB video bandwidth.

■Compatibility – Compatible with all modes/resolutions of VGA and XGA graphic cards, monitors, and projectors.

■Input connector – Attached 1' 15-pin HD male cable is includ- ed for reliable connection of video signals.

■Output connectors – Features 15-pin HD female connectors for buffered video output and non-buffered local monitor output.

■ID bits – ID bits are routed to local monitor output.

■Power supply – A 110VAC, wall-mount power supply is attached to the USA/domestic version of the P/2 DA2 LC, and a 110-220VAC, desktop power supply is attached to the world version of the P/2 DA2 LC.

■Part numbers

60-160-01 (USA/domestic)

60-160-02 (World)

APPLICATION DIAGRAM

P/2 DA2 LC

Up to 100' w/ Extron

VGA Extension Cable

PC Computer Projector

P/2 DA2 MT

Extron’s P/2 DA2 MT is a mountable, one input, two buffered out- put, high resolution VGA/SXGA distribution amplifier with audio. This DA drives a high resolution computer-video signal up to 250 feet through high-quality cable, such as Extron’s VGA cable. For con- venient access, the P/2 DA2 MT may be mounted under a desk or through a desk (through-desk mounting brackets are optional).

FEATURES

■Bandwidth – 300 MHz (-3dB) RGB video bandwidth.

■Compatibility – Compatible with all modes/resolutions of VGA, SVGA, XGA, and SXGA graphic cards, monitors, and projectors. Compatible with Mac sources and Mac-compatible displays with optional Mac/VGA adapter.

■Input connector – Features a 15-pin HD female connector for video input.

■Output connectors – Features 15-pin HD female connectors for buffered video output and buffered local monitor output.

■Audio connectors – Features a 3.5 mm female audio jack for audio input and a 3.5 mm captive screw connector for bal- anced or unbalanced audio output.

■Audio interfacing – Unbalanced audio may be converted to balanced audio. Balanced audio eliminates noise usually associ- ated with unbalanced audio when distributed over long cable runs.

■ID bits – ID bits are normally routed to local monitor output. ID bit termination is dip switch selectable.

■Level and peaking (display output only) – Level control adjusts brightness level of image. Peaking control adjusts sharpness level of image.

■Mountable – Includes detachable brackets for under-desk mounting. Optional brackets available for through-desk mounting.

■Power supply – Includes an external 9VDC desktop power supply (detachable).

■Part number: 60-295-01