![](/images/new-backgrounds/1031543/3154331x1.webp)
Specifications
Audio
Voltage gain |
|
MPA |
|
RCA and TRS inputs | 222x (47 dB) |
Captive screw input | 57x (35 dB) |
MPA |
|
RCA and TRS inputs | 317x (50 dB) |
Captive screw input | 81x (38 dB) |
CMRR | 75 dB (typical) @ 1 kHz |
Bass adjustment | ±10 dB @ 100 Hz |
Treble adjustment | ±10 dB @ 10 kHz |
Audio input
Number/signal type | 1 stereo/mono, balanced/unbalanced input |
| 2 stereo/mono, unbalanced inputs |
| (The three inputs are individually buffered and mixed together. Stereo signals |
| are actively summed into a mono signal.) |
Connectors | (1) 3.5 mm captive screw connector, 5 pole (main input) |
(1)3.5 mm mini audio jack (tip, ring, sleeve)
1 pair RCA
Impedance | >10k ohms balanced/unbalanced, DC coupled |
Maximum level | +20 dBu (balanced, captive screw) or +4 dBV (unbalanced, RCA/TRS) at |
| 1% THD+N |
Input sensitivity |
|
RCA and TRS inputs | |
| |
Captive screw input | +4 dBu if driven by one input |
|
NOTE: | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
Audio output
Number/signal type
MPA | 1 single channel (mono) 70 V |
MPA | 1 single channel (mono) 100 V |
Connectors | (1) 5 mm screw lock captive screw connector, 2 pole |
Load impedance |
|
MPA | 125 ohms minimum |
MPA | 250 ohms minimum |
Frequency response | 80 Hz to 20 kHz, +1 |
THD + Noise | <0.2% @ 1 kHz at 3 dB below clipping |
S/N | >75 dB, 20 Hz to 20 kHz, unweighted |
Damping factor | >100 |
High pass filter | 80 Hz, 12 dB/octave roll off |
Amplifier type | Class D |
MPA | 10 |