Troubleshooting

Troubleshooting

Under different circumstances, the front panel LED lights green or amber, which provides diagnostic information.

Amplifier Fails to Exit Standby Mode Promptly

Power LED

Problem Description

Problem Solution

Color

 

 

 

 

 

Amber

No output signal.

No input detected: verify that there is an

 

 

input signal.

 

 

If a signal is present, raise the input level.

 

 

The amplifier is in standby mode and the

 

 

output has been turned off. Check the

 

 

remote port.

 

 

 

Green or

Slow to exit standby

The input signal may be too weak. Raise

Amber

mode when a signal is

the input level.

 

present.

 

Amplifier Enters Standby Mode Too Early

Power LED

Problem Description

Problem Solution

Color

 

 

 

 

 

Green or

Enters standby mode

The input signal may be too weak. Raise

Amber

early.

the input level.

MPA 401-70V and MPA 401-100V • Setup and Operation

13

Page 19
Image 19
Extron electronic MPA 401 manual Troubleshooting, Amplifier Fails to Exit Standby Mode Promptly