Switcher Mode controls
12Separate Switcher mode — This is the secondary function of this button. Press and release this button while pressing and holding the Mode button ( 14 ) to select the Separate Switcher mode. The associated LED indicates if the Separate Switcher mode is on (when lit) or off. When the Mode button is released, the LED resumes input indication.
13Single Switcher mode — This is the secondary function of this button. Press and release this button while pressing and holding the Mode button ( 14 ) to select the Single Switcher mode. The associated LED indicates if the Single Switcher mode is on (when lit) or off. When the Mode button is released, the LED resumes input indication.
14Mode — Press and hold this button for more than 2 seconds to view the switcher status. It also allows mode and setting changes when used in combination with other buttons, as previously indicated.
Front Panel Operation
EXEC.MODE
VGA / AUDIO
1 | 2 | 3 | 4 |
MODE SINGLE SEPARATE
|
|
|
|
|
|
|
|
| MPS SERIES |
|
|
|
|
|
|
|
|
| MEDIA PRESENTATION SWITCHER |
|
|
| VIDEO / AUDIO |
| PROGRAM AUDIO | MIC | |||
1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 |
|
|
|
|
|
|
|
|
|
| VOLUME | VOLUME |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| PROG VOL RESET | MIC VOL RESET | MIC POWER ON/OFF | MUTE | MIX |
Figure 3-2 — MPS switcher front panel
The functions of the front panel controls are described in the following sections.
Input selection in Single Switcher mode
In Single Switcher mode the switcher emulates one switcher with 12 inputs. In this mode, when one of the inputs is selected, the input is routed to the outputs (video and audio) for that group, and the audio is sent to the program audio output as well. All of the other outputs are muted.
When you select and press an input button in Single Switcher mode, the green LED indicator to the right of the button lights steadily. All of the other LEDs turn off. To select a different input, press a different input button.
The Extron IR 102 Universal Handheld Remote Control can be used with an
MPS 112 switcher only when the switcher is in Single Switcher mode.
The MPS 112 must be in Single Switcher mode if it is to be slaved to an
Extron MLC (Medialink™ Controller).
Input selection in Separate Switcher mode
There are three input selection groups on the front panel: VGA/Audio,
Each of the input selection groups has four numbered input selection buttons (1 through 4), which allow you to choose from among the four separate input sources in that group that the switcher can output.
All outputs of the three groups are active, but the audio from only one group is routed to the program audio output. That group (input) is indicated by a flashing LED, while the other two groups are indicated by solid LEDs. See the Program Audio section in this chapter for more details.