MSW 4V SDI rs • Serial Communication
Serial Communication, cont’d
3-10

MSW 4V SDI rs A

Appendix A

Specifications, Part Numbers,

and Accessories

Specifications
Parts
8. A status bar, showing the progress of the upload appears
in the Firmware Loader window. The firmware upload to
the switcher may take several minutes.
Once the status bar has progressed fully from left to right
across the indicator window, the Firmware Loader utility
automatically resets the switcher.
C If the Firmware Loader utility exits before the status
bar has progressed completely across the indicator
window, the firmware may be corrupted and may no
longer respond to the Universal Switcher Control
Program. If you experience problems with this
procedure, call the Extron S3 Sales & Technical
Support Hotline.
When successfully completed, the installation is confirmed
with a “Transfer Complete!” message, as shown below.
Figure 3-8 — The upload confirmation message
9. Click the Exit button to exit the Firmware Loader utility.
Using the help system
For information about program features, you can access the help
program in two ways:
From within the Universal Switcher Control Program,
• Click on the Help entry on the task bar, or
• Press the F1 key.