Specifications — MTP 15HD RS Series, cont’d
Control/remote — external device
Serial control port input/output
MTP T 15HD RS ����������������
Receivers ���������������������������� 1 set of proprietary signals on a female
Serial control port output/input
MTP T 15HD RS ���������������� 1 set of proprietary signals on a female
Receivers ����������������������������
NThe serial communications link of an MTP RL 15HD RS or an MTP RL 15HD RS SEQ is unidirectional only, transmitter to receiver, unless the receiver's directional jumper has been repositioned. The jumper should be repositioned only when the receiver is the only one in the system.
Baud rates �������������������������������������� | Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are |
| possible. Performance will vary based on baud rate and cable length.) |
Protocol ������������������������������������������ Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
NProtocol is mirrored between the transmitter and the receiver.
Serial control pin configurations� Captive screw connector: 1 = TX, 2 = RX, 3 = GND
General
Recommended cable type������������ | CAT 5/5E/6 (shielded or unshielded) |
External power supply ����������������� | 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 2 A, regulated |
Power input requirements ����������� | 12 VDC, 0.5 A |
Temperature/humidity���������������� | Storage: |
| Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling ������������������������������������������� Convection, no vents
Mounting
Rack mount ������������������������ Yes, with optional 1U, 9.5" deep rack shelf (RSU 129,
Furniture mount���������������� Yes, with optional Mini
Pole mount ������������������������� | Yes, with optional projector mounting kit, part #70‑217‑01 (PMK 100) |
Enclosure type ������������������������������� | Metal |
Enclosure dimensions������������������� | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) |
| (4.3 cm H x 10.9 cm W x 7.6 cm D) |
| (Depth excludes connectors.) |
Product weight ������������������������������ | 0.4 lbs (0.2 kg) |
Shipping weight ���������������������������� | 2 lbs (1 kg) |
Vibration����������������������������������������� | ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliances |
|
Safety����������������������������������� | CE, |
EMI/EMC �������������������������� | CE, |
MTBF����������������������������������������������� | 30,000 hours |
Warranty����������������������������������������� | 3 years parts and labor |
NAll nominal levels are at ±10%.
NSpecifications are subject to change without notice.