Programmer’s Guide, cont’d
MVX Plus 128 VGA A Matrix Switcher • Programmer’s Guide
4-14
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Resets
Reset global presets and names EZG}Zpg]Clear all global presets and
their names.
Reset one global preset EX1!ZG}ZpgX1!] Clear global preset X1!.
Reset RGB delays EZD}Zpd]Reset all RGB delays to 0.0
seconds.
Reset audio input levels EZA}Zpa]Reset all audio input levels
(gain and attenuation) to 0 dB.
Rest audio output levels EZV}Zpv]Reset all audio output
levels (volume) to 100% (no
attenuation).
Reset all mutes EZZ}Zpz]Reset all video and audio
mutes.
Reset room map EZR}Zpr]Clear all room presets.
Reset individual room EX*ZR}ZprX*] Clear all presets for room X*.
Reset individual room preset EX**X1@ZP}ZppX**X1@] Clear an individual room
preset and name.
Reset flash EZFFF}Zpf]Reset flash memory (erase all
user-supplied files).
Reset whole switcher EZXXX}Zpx]Clear all ties and presets,
reset all audio gains to 0 dB,
and reset volume to 100%.
Absolute reset EZQQQ}Zpq]Similar to Reset whole
switcher, plus clear the IP
address to 192.168.254.254
and subnet mask to
255.255.000.000.
View ties, gain, volume, mutes, presets, and DSVP
View RGBHV output tie X#&X@]
Example: 15& 27]Input 27 RGBHV is tied to
output 15.
View video output tie X#%X@]
Example: 7% 02]
Input 2 video is tied to output 7.
View audio output tie X#$X@]
Example: 3$ 06]
Input 6 audio is tied to output 3.
View input gain X@GX$]
Example: 4G -02]Gain for input 4 is -2 dB.
View output volume X@VX&]
Example: 7V 55]Volume for output 7 is 55%.
View output mutes EVM} X1$1, X1$2, ... X1$] Each X1$ response is the
mute status of an output,
starting from output 1.
Example: EVM}02301000]Output 2 audio is muted,
output 3 video and audio are
muted, and output 5 video is
muted. All other outputs are
unmuted.