Setup Guide —­ P/2 DA2 Plus

NThese DIP switches affect only the output display and not the local monitor display.

Step 5 — Power up

Connect the power supply cord of the P/2 DA2 Plus to a 100 to 240 VAC power source and power up the local monitor, PC, and display device.

Operation

After the P/2 DA2 Plus and its connected devices are powered up, the system is fully operational. For further information, see “Troubleshooting” below.

Troubleshooting

Check all cable connections. If problems still exist, check the following steps:

1.If the image on the laptop and/or projector is distorted or unstable, do the following:

Check if the front LED of the P/2 DA2 Plus is lit.

Slide DIP switch 1 to a different position to see if the image becomes normal.

2.If there is no image on the projector, do the following:

Check if the front LED is lit.

Check if the VGA signal from the laptop is routed to the VGA port. Each laptop uses a different key combination for this function.

Slide DIP switch 2 to a different position and see if an image appears.

3.If the image still does not display correctly or the front panel LED of the P/2 DA2 Plus does not light, call the Extron Sales and Support hotline.

Extron USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500 +1.714.491.1517 FAX

Extron USA - East

+800.633.9876

Inside USA / Canada Only

+1.919.863.1794 +1.919.863.1797 FAX

Extron Europe

Extron Asia

Extron Japan

Extron China

+800.3987.6673

+800.7339.8766

+81.3.3511.7655

+400.883.1568

Inside Europe Only

Inside Asia Only

+81.3.3511.7656 FAX

Inside China Only

+31.33.453.4040

+65.6383.4400

 

+86.21.3760.1568

+31.33.453.4050 FAX

+65.6383.4664 FAX

 

+86.21.3760.1566 FAX

© 2010 Extron Electronics. All rights reserved.

Extron Middle East

+971.4.2991800 +971.4.2991880 FAX

www.extron.com

68-1237-50

Rev. A

01 10

Page 2
Image 2
Extron electronic P/2 DA2 setup guide Operation, Troubleshooting, Power up

P/2 DA2 specifications

Extron Electronics is a well-regarded manufacturer in the AV technology space, known for their commitment to quality and innovation. Among their extensive product line, the P/2 DA2, P/2 DA4, and P/2 DA6 distribution amplifiers stand out as reliable solutions for distributing video signals in both commercial and residential settings. These devices are designed to maintain signal integrity while allowing for multiple outputs from a single video source, making them essential in various AV applications.

The P/2 DA2 model is designed to distribute one video signal to two identical outputs. It features a bandwidth of up to 300 MHz, ensuring that high-resolution video signals are transmitted without degradation. The P/2 DA2 supports a wide range of video formats, including composite video, S-video, and component video, providing versatility in different installation scenarios. Additionally, it comes with Extron's built-in signal compensation technology, which automatically adjusts the signal to compensate for any potential loss caused by long cable runs.

Moving up the line, the P/2 DA4 offers four identical outputs from a single input, catering to more extensive installations where multiple displays are needed. Like the P/2 DA2, it also supports a range of video formats and boasts a wide bandwidth of 300 MHz. Its intelligent input sensing feature allows for automatic switching between input signals, making it an ideal choice for setups where multiple sources are frequently used. Furthermore, the P/2 DA4 is equipped with Extron's distribution amplifier technology specifically engineered to preserve video quality even in complex configurations.

The P/2 DA6 takes it a step further with six outputs, ideal for large venues, conference rooms, or events where multiple monitors need to display the same content simultaneously. It maintains the same high bandwidth and signal integrity standards as its smaller counterparts and includes Extron’s patented video equalization features, which compensate for signal loss over longer distances. This model also allows for easy integration into existing AV infrastructures, thanks to its rack-mountable design and standard control features.

In summary, the Extron P/2 DA series offers robust video distribution solutions tailored for various applications. With their high bandwidth, support for multiple video formats, and intelligent signal management features, the P/2 DA2, P/2 DA4, and P/2 DA6 are invaluable tools for professionals seeking to enhance their AV systems while ensuring peak performance and reliability.