Extron electronic P/2 DA2 MT manual Specifications, Recommended pilot drill hole size, Video, Sync

Installation and Operation, cont’d

Recommended pilot drill hole size

for supplied screws = 3/32” x 1/4” deep.

Specifications

Video

Gain	(0.7V) unity, (0.8V) 15%
Bandwidth	300 MHz (-3dB)

Video input

Number/signal type	1 VGA-UXGA RGBHV, RGBS, RGsB,
	RsGsBs
Connectors	1 15-pin HD female
Minimum/maximum level(s) ....	Analog	0.4V to 1.4V p-p with no
		offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 135 kHz
Vertical frequency	30 Hz to 170 Hz
Return loss	-38.3dB @ 5 MHz
Maximum DC offset	200mV

Video output

Number/signal type	2 VGA-UXGA RGBHV, RGBS, RGsB,
	RsGsBs
	(1 for display, 1 for local monitor output)
Connectors	2 15-pin HD female
Minimum/maximum levels	0.4V to 1.4V p-p
Impedance	75 ohms
Return loss	-41dB @ 5 MHz
DC offset	±5 mV maximum with input at 0 offset

Sync

Input type	RGBHV, RGBS, RGsB, RsGsBs
Output type	RGBHV, RGBS, RGsB, RsGsBs
Input level	3V to 5V p-p
Output level	TTL	5V p-p
Input impedance	75 ohms or 510 ohms (selectable)
Output impedance	75 ohms
Max. propagation delay	18.8 nS
Max. rise/fall time	4 nS
Polarity	Positive or negative

Audio

Gain	Unbalanced 0dB, balanced +6dB
Frequency response	20 Hz to 20 kHz, ±0.05dB
THD + Noise	0.03% @ 1 kHz at rated maximum output
	drive
S/N	>90dB, balanced, at rated maximum
	output drive (21dB)
Stereo channel separation	>80dB @ 1 kHz

6 P/2 DA2 MT • Installation and Operation P/2 DA2 MT • Installation and Operation 7