A | Dual color power LED — This LED lights amber when |
| power only (no signal) is applied to the PVT, and green |
| when power and a signal are both present. |
B C
AUTO Auto switch LED (PVT SW RGB only) — This LED SWITCH lights green when the unit is in auto switch mode.
Input selection button with LED (PVT SW RGB only) —
Press these buttons to select (switch) between inputs |
| 1 |
1 and 2. The associated LEDs lights green when |
|
|
the input has an active video signal connected, and |
|
|
|
| |
amber when there is no signal present. |
|
|
D Dual configuration dual DIP switch (PVT SW RGB only) —
The left DIP switch allows the user to | AUTO |
|
|
|
|
|
|
|
| FOLLOW | |
select the switching mode, and the right |
| ON |
| ||||||||
DIP switch allows the user to configure |
|
|
|
|
|
|
|
|
|
| MONITOR |
MANUAL |
|
|
|
|
|
|
|
|
| INPUT 1 | |
|
|
|
|
|
|
|
|
| |||
the local monitor output from the rear |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| |
panel. |
|
|
|
|
|
|
|
|
|
|
|
Switching mode (left DIP switch):
Set the switch up to Auto for automatic switching of the inputs with an active signal.
NWhen turning off auto switching, the PVT goes back to the input that was selected prior to turning the auto- switching on.
Set the switch down to Manual for front panel input switching or input switching by contact closure control.
NIn Auto mode, if both inputs have an active signal, Input 1 has priority.
Local monitor output (right DIP switch):
Set the switch up to Follow for automatic switching of the local monitor output to the current selected input.
Set the switch down to Input 1 for local monitor output of the signal from input 1 only.
PVT Series (Rack Mount Models) • Installation |