Extron electronic RCP 1000 user manual Two, Installation, Introductionroduction, cont’d, Features

Introductionroduction, cont’d

The Extron RCP 1000 remote control panel provides complete remote control of the input, effect, and transition controls available on an SGS 408 seamless switcher. Bi-directional communication with the SGS 408 allows a switch to occur from either device while the other device is updated to reflect the switch.

Features

•Brightness and contrast controls — Adjust the brightness and contrast of an input.

•Centering and sizing — Allow the output to be centered or sized, both horizontally and vertically.

•Horizontal and vertical filtering — Provide up to eight levels of horizontal and five levels of vertical filter control. These operator-selectable filtering controls ensure that no picture detail is dropped.

•Remote operation — Can be operated up to 1000 feet

(304.8 meters) away.

•Power — Receives power from the SGS 408.

•Program and preview inputs — Allow you to select the upcoming switch.

•Transitions — Control the type of switch that will occur between the preview and program outputs. The Cut button creates an instant switch between the preview and program outputs. The effect buttons allow the switcher operator to choose from among four predefined effects. The RCP 1000 effect presets are the same as the SGS 408 front panel effect presets.

RCP 1000 Remote Control Panel

Chapter2Two

Installation

Rear Panel Connector

Installation

Making an RCP Comm Cable

1-2 RCP 1000 • Introduction