Extron electronic RFF 052, RFF 054 manual Extron USA East Extron Europe Extron Asia Headquarters

RFF 052 and RFF 054 False Plates

for 1-inch Products Installation Guide

The Extron® False Plates for 1-inch Products increase the face height of 1-inch tall, quarter rack width (RFF 054) or half rack width (RFF 052) products to full single rack unit height (1U), aiding airflow management and aesthetics. Install plates as follows:

1.Clean the 1-inch tall Extron device to be rack mounted of any dust or debris.

2.Remove the protective film from the adhesive tape on the RFF 052 or RFF 054.

3.Align the plate on the top of the device so that the adhesive faces the device and the raised side runs flush with the front panel of the device.

4.Firmly press the plate onto the device.

5. Install the 1-inch tall device to the rack shelf.

2 3 4 5

Extron USA - West -	Extron USA - East	Extron Europe	Extron Asia
Headquarters	+800.633.9876	+800.3987.6673	+800.7339.8766
+800.633.9876	Inside USA/Canada Only	Inside Europe Only	Inside Asia Only
Inside USA/Canada Only	+1.919.863.1794	+31.33.453.4040	+65.6383.4400
+1.714.491.1500	+1.919.863.1797 FAX	+31.33.453.4050 FAX	+65.6383.4664 FAX
+1.714.491.1517 FAX

Extron Japan

+81.3.3511.7655 +81.3.3511.7656 FAX

Extron China

+400.883.1568 Inside China Only

+86.21.3760.1568 +86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800 +971.4.2991880 FAX

68-2160-01

Rev. A

© 2011 Extron® Electronics. All rights reserved. www.extron.com

07 11