RGB 460xi Series • Setup Guide
This guide provides basic instructions for an experienced technician to install the Extron RGB 46x series of architectural adapter plates (AAP) plates.
For additional details see the RGB 460xi Series User Guide at www.extron.com.
Disconnect Power
MONITOR | H. SHIFT |
|
|
| |
| VIDEO |
INPUT | MIN/MAX |
| AUDIO |
|
| L/MONO | R |
NO MONITOR
MONITOR
AUDIO
RGB 464xi 
Turn off all equipment. Disconnect the computer, the interface, and output devices from the power source.
Attach AAPs
Attach any optional AAPs to the interface (RGB 468xi, RGB 468 Mxi, or RGB 468xi AKM UK only), before connecting cables (see the RGB 460xi Series User Guide for more details).
Set DIP Switches
A bank of DIP switches, (see item A on the rear panel diagram on the next page), controls various options. Moving a switch up sets it On as shown by switch 7 at right. Moving it down sets it Off.
NOTE: The default for all DIP switches, except switch 7, is off (down). Switches 7 and 8 work 
together for sync routing. They cannot both be set to on, nor can both be set to off.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Open / Off
Switch | Function | Setting | Description | |
Number | ||||
|
|
| ||
|
|
|
| |
|
|
|
| |
|
| Off | Outputs separate horizontal and vertical sync on the H and V | |
|
| connectors for RGBHV. | ||
1 | Sync on green |
| ||
|
| |||
On | Outputs sync on green (SOG). | |||
|
| |||
|
|
|
| |
2 | Composite sync | Off | Outputs RGBHV or RGsB video. | |
|
| |||
On | Outputs combined horizontal and vertical sync for RGBS. | |||
|
| |||
|
|
|
| |
| Digital Display Sync Processing | Off | Interface performs sync process operations with Advanced | |
3 |
| Digital Sync Processing (ADSP™). | ||
(DDSP™) |
| |||
| On | Interface uses DDSP. | ||
|
| |||
|
|
|
| |
4 | Serration pulse | Off | Serration pulses are off. | |
|
| |||
On | Serration pulses are on. | |||
|
| |||
|
|
|
| |
5 | Vertical sync pulse width | Off | Wide | |
|
| |||
On | Narrow | |||
|
| |||
|
|
|
| |
6 | Negative sync | Off | Output sync same as input. | |
|
| |||
On | Output sync for to negative polarity. | |||
|
| |||
|
|
|
| |
|
| Off | Must be set to Off if switch #8 is On. | |
7 |
|
|
| |
| On | Sync routing to | ||
|
| |||
|
| (other than 13 inch) and VGA monitors (default). | ||
| Composite sync routing |
| ||
|
|
| ||
| Off | Must be set to Off if switch #7 is On. | ||
|
| |||
8 |
|
|
| |
| On | Sync routing to | ||
|
| |||
|
| monitors. | ||
|
|
| ||
|
|
|
|
1
