Extron electronic SMB 205 L specifications Specifications, General

If cables are to access the SMB through a hole cut into the mounting surface:

•Mark the pass-through location through the mounting base AAP opening(s).

•Detach the SMB from the mounting surface and cut the opening(s) using an appropriate saw, drill, or other tool.

5.With the SMB fastened to the mounting surface, run all necessary cables through the pass-through opening before installing any device(s) into the SMB. See the following illustration.

NThe SMB has cable management tiedown points for securing the cables into position. There is also a grounding stud for grounding any installed device(s).

Pass-through Openings for Cables

Cable Tie

Cable Management Tiedown Points

Ground Stud

Optional Split AAP

6.Test all device(s) to be installed with the cables attached prior to fastening them to the SMB.

7.Attach the device to the front of the SMB enclosure.

					X
					AUEO
			R		VID	Mounting
				5	6
				DVD
		TO	VC		PC
	E			OP	C	Screws
		AU E
	OR	IMAG	4		DO
	CT				CAM
PR	OFF	MUTE	LAPT		G
	E				CONFI
					MediaLink
	ON			IR
	LUM
	VO

on	Extron
Extr	MLC 226 AAP L
	Front

Specifications

General

Mounting	Surface mountable or mountable to furniture
	including lecterns and tabletops
Enclosure type	Metal
Enclosure dimensions
SMB 203 L	3.6" H x 6.5" W x 3.8" D
	9.2 cm H x 16.5 cm W x 9.7 cm D

3.20" 36°

	3.60"
1.00"
	6.51"
	3.82"
SMB 205 L	........................... 3.6" H x 10.0" W x 3.8" D
	9.2 cm H x 25.4 cm W x 9.7 cm D
3.20"	36°
1.00"
	3.60"
	10.00"
	3.82"
Faceplate compatibility
SMB 203 L	Mounts a low-profile, 3.2" high, 6.5" wide, L-type
	faceplate
SMB 205 L	Mounts a low-profile, 3.2" high, 10.0" wide, L-type
	faceplate

NThe SMB 200 Series does not accommodate products with US gang-sized faceplates; they mount only low-profile, L-type faceplates, including those of the MLC 226 IP L and MLM 104 LAAP.

2 SMB 203 L and SMB 205 L Installation Guide SMB 203 L and SMB 205 L Installation Guide 3