Extron electronic SMB 205 L specifications Models, Included Parts, Part number, Included parts

Mark pilot holes

for keyhole slot (1/16”) or mounting hole (1/16”).

Number of accessible AAP openings

SMB 203 L	1 double-space (back), 1 double-space (bottom)
SMB 205 L	2 double-space (back), 2 double-space (bottom)
Included blank AAP plates
SMB 203 L	1 double-space
SMB 205 L	2 double-space
Furniture mounting holes	4 (2 are slotted)
Cable management lance punches
SMB 203 L	2
SMB 205 L	3
Front angle	36° from vertical, 54° from horizontal
Product weight
SMB 203 L	1.1 lbs (0.5 kg)
SMB 205 L	1.6 lbs (0.7 kg)
Shipping weight	2 lbs (1 kg)
Vibration	ISTA 1A in carton (International Safe Transit
	Association)
Warranty	3 years parts and labor

NSpecifications are subject to change without notice.

Models

Models	Part number
SMB 203 L (black, white)	60-942-02, -03
SMB 205 L (black, white)	60-943-02, -03

Included Parts

These items are included in each order of the SMB 203 L or SMB 205 L.

SMB 203 L and SMB 205 L Installation Guide

NFor illustration purposes, the following steps use the SMB 205 L as an example, but the instructions apply to the SMB 203 L as well.

1.For tabletop placement, the four included adhesive rubber feet may be applied to the bottom corners of the mounting base.

2.For angled installations, securely mount the SMB using the two keyhole slots and/or mounting holes in the mounting base.

Mount the SMB using the keyhole slots and/or the mounting holes:

•Position the SMB at the desired location.

• Mark the holes on the surface to be drilled. See the illustration at right.

3. Drill 1/16" pilot holes for

the keyhole slots or the mounting holes. For the

keyhole slots, insert screws into the pilot holes, but

do not tighten them down until the SMB is slid into position. For the mounting holes, position the SMB over the holes and secure the SMB into position.

4.Cables may access the SMB through the AAP openings in the rear panel and the bottom mounting base.

If cables are to access the SMB through the rear panel, use the rear panel AAP openings, as shown here. AAP modules are sold separately.

www.extron.com

Included parts						Replacement
						part number
Adhesive rubber feet (4)
Blank double-spaced AAP (1), SMB 203 L only						70-090-12 (black)
								or
						70-090-22 (white)
Blank double-spaced AAP (2), SMB 205 L only						70-090-12 (black)
								or
						70-090-22 (white)
								68-1497-01 Rev. A
							11 07
Extron Electronics, USA		Extron Electronics, Europe		Extron Electronics, Asia				Extron Electronics, Japan
1230 South Lewis Street		Beeldschermweg 6C		135 Joo Seng Rd. #04-01				Kyodo Building, 16 Ichibancho
Anaheim, CA	92805	3821 AH Amersfoort, The Netherlands		PM Industrial Bldg., Singapore 368363				Chiyoda-ku, Tokyo 102-0082
800.633.9876	714.491.1500	+800.3987.6673	+31.33.453.4040	+800.7339.8766	+65.6383.4400			Japan
FAX 714.491.1517		FAX +31.33.453.4050		FAX +65.6383.4664				+81.3.3511.7655 FAX +81.3.3511.7656

Rear	Mounting
	Nuts

AAPs (not included)

Optional Split AAP

4 SMB 203 L and SMB 205 L Installation Guide SMB 203 L and SMB 205 L Installation Guide