Digital video ���������������������� RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
NThese SMX HDMI Series boards are not compatible with HDMI 1.3.
Digital audio ���������������������� Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
Consumer Electronics Control (CEC)
Supports CEC wired infrared data
EDID and DDC������������������ Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
HDCP���������������������������������� Compliant with
HPD������������������������������������� Supports hot plug detection (HPD) of display as a
Maximum pixel clock ������������������� 165 MHz
Standards���������������������������������������� DVI 1.0, HDMI 1.2
Switching speed ���������������������������� 200 ns, max.
Video input — SMX 44/48/84/88 HDMI
Number/signal type��������������������� | 4 or 8 (depending on model) digital RGB single link HDMI (or |
Connectors ������������������������������������� | 4 or 8 female HDMI type A |
Equalization ����������������������������������� | Automatic |
Input cable length ������������������������� | >50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p |
Video output — SMX 44/48/84/88 HDMI
Number/signal type��������������������� | 4 or 8 (depending on model) digital RGB single link HDMI (or |
Connectors ������������������������������������� | 4 or 8 female HDMI type A |
Automatic | |
Peripheral device power �������������� | 250 mA per output |
Optical specifications — SMX 88/1616 Fiber Optic I/O board
NThe fiber optic I/O cards are class 1 laser products. They meet the safety regulations of
Number/type �������������������������������� 8 or 16 single mode, or 8 or 16 multimode fiber optic inputs and outputs per I/O card
NOnly one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.
Connectors ������������������������������������� | 8 or 16 LC connectors per I/O card |
Operating distance������������������������ | 30 km (18.75 miles) with singlemode (SM) cables with a FOX 500 DA6 SM or |
| FOX 500 TX/RX SM |
| 0.15 km (492') with multimode (MM) cables with a FOX 500 DA6 MM or |
| FOX 500 TX/RX MM |
NOperating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion,
Nominal peak wavelength ���������� 850 nm for multimode (MM), 1310 nm for single mode (SM)
Extron SMX System MultiMatrix Modular, | 7 |
