Sync - VGA SMX 84/88/1616 VGA | Extron electronic SMX System

Specifications — SMX System MultiMatrix Switchers, cont’d

Sync — VGA (SMX 84/88/1616 VGA)

Input type��	RGBHV, RGBS, RGsB, RsGsBs
Output type��	RGBHV, RGBS, RGsB, RsGsBs (follows input)
Input level ��	0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level ��	AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
Input impedance ��	510 ohms
Output impedance ��	75 ohms
Horizontal frequency��	15 kHz to 150 kHz
Vertical frequency��	30 Hz to 150 Hz
Max. propagation delay ��	40 ns
Max. rise/fall time ��	18 ns
Polarity ��	Positive or negative (follows input)

Routing
SMX 44 HD SDI ��	4 x 4 matrix
SMX 84 HD SDI ��	8 x 4 matrix
SMX 88 HD SDI ��	8 x 8 matrix
SMX 1616 HD SDI ��	16 x 16 matrix
Gain ��	Unity
Maximum data rate ��	2.97 Gbps
Data types��	8 or 10 bit
Operation standards ��	SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120

Number/signal type��	4, 8, or 16 single link SDI, HD-SDI; or dual link HD-SDI
Connectors ��	4, 8, or 16 BNC female
Nominal level ��	0.80 Vp-p ± 10%
Impedance��	75 ohms
Return loss��	<-15 dB @ 1 MHz to 1.5 GHz
Equalization ��	Automatic
Input cable equalization distance
HD-SDI
Extron SHR, Belden 1694A cable		492' (150 m)
Extron HR, Belden 1505A cable		328' (100 m)
SDI
Extron SHR, Belden 1694A cable		984' (300 m)
Extron HR, Belden 1505A cable		656' (200 m)

NThe transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system.

Number/signal type��	4, 8, or 16 single link SDI, HD-SDI; or dual link HD-SDI
Connectors ��	4, 8, or 16 BNC female
Nominal level ��	0.80 Vp-p ± 10%
Impedance��	75 ohms
Return loss��	<-15 dB @ 1 MHz to 1.5 GHz
DC offset��	±0.5 V with input at 0 offset
Re-clocking��	Automatic, or use available bypass mode for nonstandard rates
Jitter��	<0.2 VI

4Extron SMX System MultiMatrix Modular, Multi-plane Matrix Switchers • Specifications