Setup Guide —­ SW2 VGA DA2 AF R

Step 4 — Video outputs

Connect an RGBHV, RGBS, RGsB, or RsGsBs video display to the 15-pin HD connector (output B). A 15-pin HD connector (output A) is also provided for a local monitor.

Step 5 — Audio output

Connect an audio device to the 3.5 mm, 5-pole captive screw connector for balanced or unbalanced audio output. For correct wiring, follow the diagram below.

Tip

L

Tip

Ring

NO Ground Here

 

Sleeve(s)

 

Sleeve(s)

Tip

R

Tip

Ring

NO Ground Here

 

L R

Balanced Audio Output

Do not tin the wires!

Unbalanced Audio Output

CAUTION

For unbalanced audio, connect the sleeve(s) to the ground contact.

DO NOT connect the sleeve(s) to the negative (-) contacts.

Step 6 — Autoswitching/contact closure

Connect a contact closure control device to the left three pins of the 3.5 mm, 5-pole captive screw connector.

Pin 1 — selects input 1 when connected to ground (pin 3).

Pin 2 — selects input 2 when connected to ground (pin 3).

Pin 3 — connects to the ground wire (equipment ground).

Pins 4 and 5 — if jumpered or shorted together will turn the autoswitching mode on. When the autoswitching mode is on, the switcher automatically switches to the highest numbered input that has an active sync signal.

CONTACT AUTO-SW

1 2

Jumper pins 4 & 5 for autoswitching.

Contact Closure Control

See “Rear Panel Features” in the SW2 VGA DA2 AF R User’s Manual for details.

Step 7 — Operation

Power up all input and output devices and the switcher.

If the switcher is in manual switching mode, select an input from the front panel buttons or by using the contact closure controller.

If the switcher is in autoswitching mode (rear panel Contact/Auto-sw pins are jumpered together), the switcher automatically selects the highest numbered input with an active sync signal.

The image should now appear on screen, and sound from the audio source should be audible.

If image or audio problems occur, see “Troubleshooting” in the SW2 VGA DA2 AF R User’s Manual for further details.

Extron USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500 +1.714.491.1517 FAX

Extron USA - East

Extron Europe

Extron Asia

Extron Japan

+800.633.9876

+800.3987.6673

+800.7339.8766

+81.3.3511.7655

Inside USA / Canada Only

Inside Europe Only

Inside Asia Only

+81.3.3511.7656 FAX

+1.919.863.1794

+31.33.453.4040

+65.6383.4400

 

+1.919.863.1797 FAX

+31.33.453.4050 FAX

+65.6383.4664 FAX

 

© 2009 Extron Electronics. All rights reserved.

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568 +86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800 +971.4.2991880 FAX

68-460-52

Rev. A

07 09

Page 2
Image 2
Extron electronic SW2 VGA DA2 AF R setup guide Video outputs, Audio output, Autoswitching/contact closure, Operation

SW2 VGA DA2 AF R specifications

The Extron SW2 VGA DA2 AF R is a high-performance, dual-input VGA distribution amplifier designed to ensure optimal video signal distribution in a variety of professional AV applications. This device stands at the forefront of modern AV technology, offering a multitude of features that cater to the diverse needs of users in education, corporate, and broadcasting environments.

One of the primary features of the SW2 VGA DA2 AF R is its ability to take two independent VGA signals and distribute them to multiple outputs while maintaining high signal integrity. This capability is particularly valuable in settings where multiple displays are required, such as classrooms, conference rooms, and event spaces. By ensuring that the video signals remain sharp and clear across all connected devices, this distribution amplifier reduces the chances of signal degradation that can occur over long cable runs.

Additionally, the SW2 VGA DA2 AF R incorporates advanced signal processing technology, which enables the device to handle resolutions up to 1920x1200 at a 60Hz refresh rate. This ensures that high-definition content is delivered without any loss in quality, making it suitable for both standard and high-definition sources. The inclusion of active feedback circuitry also assists in maintaining signal quality and integrity, regardless of the input source.

Another notable characteristic of the Extron SW2 VGA DA2 AF R is its user-friendly design. The device features a compact and rack-mountable form factor, which allows for easy integration into existing AV setups. Additionally, it comes equipped with a set of convenient front panel indicators that provide real-time feedback on signal presence and operational status.

Moreover, the SW2 VGA DA2 AF R supports a variety of input and output configurations. With the ability to connect to different types of VGA sources, users enjoy versatility in their AV setups. This capability is further enhanced by the inclusion of audio embedding, allowing for simultaneous distribution of audio signals alongside the video.

Overall, the Extron SW2 VGA DA2 AF R stands out as a powerful solution for users looking to enhance their AV signal distribution. With its robust performance, outstanding video quality, and flexible connectivity options, this distribution amplifier is an essential component in any professional AV environment. Whether used in classrooms, corporate meeting rooms, or broadcasting facilities, the SW2 VGA DA2 AF R is designed to meet the highest standards of reliability and performance.