Extron electronic SW 2 RGB specifications Specifications SW2 RGB Switcher

Specifications — SW2 RGB Switcher

Video

Gain	Unity
Bandwidth	350 MHz (-3dB)

Video input

Number/signal type	2 RGBHV, RGBS, RGsB, RsGsBs
Connectors	2 x 5 BNC female
Minimum/maximum levels	Analog	0.4V to 1.2V p-p with no offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 135 kHz
Vertical frequency	30 Hz to 170 Hz

Video output

Number/signal type	1 RGBHV, RGBS, RGsB, RsGsBs
Connectors	5 BNC female
Minimum/maximum levels	Analog	0.4V to 1.2V p-p
Impedance	75 ohms

Sync

Input type	RGBHV, RGBS, RGsB, RsGsBs
Output type	RGBHV, RGBS, RGsB, RsGsBs
Standards	NTSC, PAL, SECAM
Input level	1V to 5V p-p
Output level	5V p-p
Input impedance	510 ohms
Output impedance	75 ohms
Polarity	Positive or negative (follows input)

Control/remote — switcher

Contact closure	9-pin female D connector
Contact closure pin configurations	1 = input 1, 2 = input 2, 8 = ground

General

Power	100VAC to 240VAC, 50/60 Hz, 10 watts, internal, auto-switchable
Temperature/humidity	Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
	Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount	Yes (1U high, ½-rack width), with optional shelf
Enclosure type	Metal
Enclosure dimensions	1.75" H x 8.75" W x 9.5" D
	4.4 cm H x 22.2 cm W x 24.1 cm D
	(Depth excludes connectors.)
Shipping weight	5 lbs (2.3 kg)
Vibration	ISTA/NSTA 1A in carton (International Safe Transit Association)
Approvals	UL, CUL, CE
MTBF	30,000 hours
Warranty	2 years parts and labor

Specifications are subject to change without notice.

(7.2-050301-D1)

1-2SW2 RGB • Specifications