Installation and
Operation
This chapter shows how to install and operate the TLP VIM Video Input Module.
Topics that are covered include:
zz Installation Overview
zz Mounting the TLP VIM
zz TLP VIM Front and Rear Panel Features
zz Operation
Installation Overview
To install and set up the TLP VIM, follow these steps:
1.Turn all equipment off. Make sure the video sources (DSS, cable boxes, PC, laptop, or other devices), the TLP VIM, and the touchpanel are turned off and disconnected from power sources.
2.Mount the TLP VIM, see "Mounting the TLP VIM", below.
3.Attach the cables, see "TLP VIM Front and Rear Panel Features" on page 4.
4.Connect power cords and turn on the devices, see "Operation" on page 6 .
Mounting the TLP VIM
The TLP VIM includes hook and loop fasteners so that it can be securely mounted on or under a table or podium near to the touchpanel.
Shut off all power to connected devices, then mount the TLP VIM as required.
TLP VIM • Installation and Operation | 3 |
