Extron electronic USFM 100 Run Cables, Attach Switcher to Mounting Plate and Secure to Base Plate

USFM 100 Installation Guide, cont'd

NOTE: Mount the switcher with the rear panel uppermost for ease of cable connection (see figure 4).

USFM 100 Base Plate

Mounting Plate		(2) 4-40 x 1/4" Screws
Securing Tab
(1) 6-32 x 1/4" Screw
PoleVault	™	Switcher

Figure 4. Attach Switcher to Mounting Plate and Secure to Base Plate

3. Run Cables

NOTE: All cable installation should be performed in accordance with local and national building codes, fire and safety codes, and local and national electrical codes.

Run signal cables from the PoleVault input wallplates, control device location, and the speakers to the USFM 100 location. Cables can be routed behind the walls, through a surface raceway (such as Wiremold 700 or 2400), or through conduit directly to the USFM 100.

4