Sharp XV-Z30000 Switching the Input Mode, Input list, Hdmi 1/2, Component and Computer buttons

Switching the Input Mode

Select the appropriate input mode for the connected equipment.

Press HDMI 1/2, COMPONENT or COMPUTER on the remote control to select the input mode.

■When you select the input mode with INPUT R/P on the projector:

•When R/P is pressed, the INPUT list appears. While the INPUT list is displayed, follow the procedure below to switch the input mode.

INPUT list

INPUT

HDMI1

HDMI2

COMPUTER

COMPONENT

–Press R/P to select the desired input mode and then press ENTER.

•If ENTER is not pressed, the projector switches to the selected input mode in a few seconds.

Note

•When you switch the input mode, the image as shown below will be displayed in the upper right corner of the screen. (You can confi rm the selected input mode and information on the input signal.)

HDMI1

YPbPr

1080P

•When is displayed, “3D” is set to “On”.

•If is displayed, it means that a 3D image signal that can be automatically detected is being input.

HDMI 1/2, COMPONENT and COMPUTER buttons

Basic

Operation

35