Sharp XV-Z30000 Setting One Touch Play, Press P/R to select Input Name and then press Enter

Setting One Touch Play,

System Standby and Input Name

When a Sharp product equipped with Consumer Electronics Control (HDMI CEC) is connected to the projector with an HDMI cable, you can use the linked function with HDMI CEC (“One Touch Play” and “System Standby”).

Note

•The CEC function may not work with some CEC devices. (When the projector is connected to a non-Sharp product, the CEC function may not work.)

■Setting the One-Touch Playback Function

(One Touch Play)

One Touch Play turns on the projector and selects the input automatically when you turn on or begin playback on connected HDMI- compliant Sharp Video Products.

Selectable	Description
items
On	This enables One Touch Play.
Off	This disables One Touch Play.

Note

•When enabling One Touch Play, be sure to enable the CEC setting on the HDMI- compliant Sharp Video Products connected to the projector.

•The Economy mode is set to “Off” when One Touch Play is set to “On”.

•In the following cases, One Touch Play is not enabled.

-When playback is paused

-When the cooling fan is running (See page 76.)

-When the lamp is warming up (See page 76.)

■Setting the System Standby Function (System Standby)

When you turn off the projector, the HDMI- compliant video equipment connected to the projector enters Standby mode.

Selectable	Description
items
On	This enables System Standby.
Off	This disables System Standby.

Menu operation n Page 42

Note

•When enabling System Standby, be sure to enable the CEC setting on the HDMI- compliant Sharp Video Products connected to the projector.

■Setting the Input Terminal Names (Input Name)

Set the name of the input terminal (up to 14 alphanumerical characters).

1 Press P/R to select “Input

Name” and then press ENTER.

Pict.	SIG	SCR	PRJ-ADJ	Net.
Input name	HDMI1
H D M I 1
Reset
Return

? or _ button	Selects a character column.
Ŧ or Ŷ button	Selects a character.
ENTER button	Sets the input terminal name.

2 Press P/R to select “Return” and then press ENTER to return to the previous screen.

• To return to the previous setting, select “Reset” and then press ENTER.

Note

•When connecting the projector to a Sharp Video Product with an HDMI cable using an input mode of HDMI1 or HDMI2 and the linked function with HDMI CEC (“One Touch Play” or “System Standby”) works normally, the name of the connected Sharp Video Product is automatically captured.

•When the input terminal name has been changed by a user, the changed name is displayed.

•To return to the default name, select “Reset” and press ENTER.

Features Useful

55