Sharp XV-Z30000 appendix Connecting the IR Emitter to the Projector, Position the IR emitter

Connecting the IR Emitter to the Projector

1Install the IR emitter unit to the stand.

Fasten

Loosen

2Insert the IR emitter cable to the unit.

3Connect the IR emitter and the projector.

To 3D SYNCHRO terminal

IR emitter cable

4 Position the IR emitter.

•3D images are intended to be viewed while facing the screen from the front.

•Position the IR emitter so that the 3D

Glasses can easily receive the infrared signals while viewing the screen from the front.

• Do not install in a location where objects may obstruct the infrared signals between the IR emitter and 3D Glasses.

• Adjust the angle of the IR emitter to suit your viewing location.

Note

•When you connect the IR emitter, make sure the power is turned off.

•The supplied IR emitter is exclusively designed for this projector. Do not connect it to other equipment.

Features Useful

67