Menu operation n Page 42

Adjusting the Projected Image (“SCR-ADJ” Menu) (Continue)

5 Adjusting the Overscan

This function allows you to adjust the Overscan area (display area).

Selectable

Description

items

 

 

 

On

The input area is displayed without

screen edges.

 

Off

The whole input area is displayed.

Note

You can adjust the Overscan area for the following input signals and the RESIZE function. Input signal:

-480I /480P

-540P

-576I/576P

-720P

-1035I

-1080I /1080P

RESIZE function:

-NORMAL

-16:9

-CINEMA ZOOM

-ZOOM 14:9

If the display area ratio is set too large, noise may appear at the screen edges. If this happens, set the display area ratio to a smaller value.

Also read “About Copyrights” on page 36.

6 Black Mask

This function allows you to apply a black mask around the outside of the image to hide flicker on the edges. Select a level from 0 (%) to 5 (%).

7CBNR

This function reduces the color break noise.

Selectable

Description

items

 

 

 

On

The CBNR function is activated.

Off

The CBNR function is not activated.

Note

When “3D” is set to “On”, the CBNR function is disabled.

When “CBNR” is set to “On”, the brightness is reduced.

8Setting On-screen Display

Selectable

Description

items

 

On

All on-screen displays are displayed.

 

 

Off

INPUT/AUTO SYNC/RESIZE/

 

CONTRAST/BRIGHTNESS/COLOR/

 

TINT/ECO+QUIET/3D ON/OFF (3D/2D

 

mode change) message are not

 

displayed.

Setting the Brightness of the Menu Screen

Sets the brightness of the menu screen.

Selectable

Description

items

 

Standard

Standard brightness

 

 

Level 1

Darker than the “Standard” brightness

Level 2

Darker than the “Level 1” brightness

0Selecting the Background Image

Selectable

Description

items

 

 

 

Logo

SHARP logo screen

Blue

Blue screen

 

 

None

— (Black screen)

52

Page 54
Image 54
Sharp XV-Z30000 appendix Adjusting the Projected Image SCR-ADJ Menu Continue, Adjusting the Overscan, Black Mask