Image Projection (Continued)

Using the Adjustment Feet

When the position of the projected image cannot be adjusted with the lens shift function, use the adjustment feet to adjust the projected angle.

The height of the projector can be adjusted using the adjustment feet when the screen is located higher than the projector, the screen is inclined or when the installation site is slightly inclined.

Install the projector so that it is as perpendicular to the screen as possible.

Rotate the adjustment feet to adjust the projected angle.

The projector is adjustable up to approximately 9 degrees (front) and approximately ±2 degrees (rear) from the standard position.

Adjusting the Focus

Press FOCUS +/– on the remote control to adjust the focus.

ROn-screen display

FOCUS

TESTPATTERN

Info

It is recommended that the focus be adjusted after the projector has warmed up for at least 30 minutes.

Adjusting the Projected Image Size

Press ZOOM +/– on the remote control to adjust the projected image size.

ROn-screen display

ZOOM

TESTPATTERN

Adjustment feet

Down Up

Up Down

Warning!

Do not hold the lens and lens cover when projector angle is adjusted.

Use caution not to pinch your fi nger in the space between the adjustment foot and the projector when the projector angle is lowered.

ZOOM buttons

FOCUS buttons

Note

After you have pressed FOCUS or ZOOM on the remote control, you can display the test pattern by pressing ENTER. The test pattern is useful for making more accurate adjustments.

For fi ne adjustments, when H&V SHIFT, FOCUS or ZOOM is pressed, the projected image moves a small amount in the desired direction for approximately one second. Hold down the buttons to move the projected image quickly.

30

Page 32
Image 32
Sharp XV-Z30000 appendix Using the Adjustment Feet, Adjusting the Focus, Adjusting the Projected Image Size