Sharp XV-Z30000 Signal Type Setting, Setting the Video Setup, Adjusting the Dynamic Range

Menu operation n Page 42

Computer Image Adjustment (“SIG-ADJ” Menu) (Continued)

Signal Type Setting

When using an input mode of HDMI1, HDMI2, or COMPUTER, set the signal type to the corresponding input signal type (RGB or YPbPr).

Selectable		Description
	items
Auto		Automatically selects the appropriate
		input signal between RGB and YPbPr.
RGB		Set when RGB signals are received.
YPbPr		Set when YPbPr signals are received.
	5 Setting the Video Setup
Selectable		Description
	items
0 IRE		Sets the black level to 0 IRE.
7.5 IRE		Sets the black level to 7.5 IRE.

Note

•This function is available for the following

signal. - 480I

6Adjusting the Dynamic Range

An optimum picture may not be displayed if an HDMI-capable device’s output signal type and the projector’s input signal type do not match. If this should occur, switch “Dynamic Range”.

Selectable	Description
items
Auto	In most circumstances, “Auto” should
	be selected.
Standard	When the black levels of the image
Enhanced	show banding or appear faded, select
	the item that results in the best picture
	quality.

7 Signal Info

Input signal information is displayed.

50