Sharp XV-Z30000 Before Using the 3D Glasses, Replacing the Button Cell Battery, Battery cover

Before Using the 3D Glasses

Before using the 3D Glasses for the first time, remove the insulating sheet attached to them.

2Remove the button cell battery.

Place the tip of the slotted precision screwdriver into the opening between the button cell and the socket.

Lift up the button cell while taking care not to get the screwdriver caught on the metal latch.

1 2

3 When the battery comes loose from the socket, pick it out with your fingers.

Replacing the Button Cell Battery

The battery has an expected service life of approximately 75 hours.

•When the battery power is low, the LED light blinks six times after the power is turned on.

•When replacing the button cell, use only the designated battery type (Maxell branded CR2032 lithium button battery).

1 Loosen the screw used to secure the battery cover, and then remove the battery cover.

1

2

4Hook a new button cell to the metal latch and insert it into the socket.

•Take care not to reverse the battery polarity (+ and -) when inserting the button cell.

5 Close the battery cover.

		Useful Features
6	Insert the screw to secure the

battery cover.

Note

•Used batteries should be disposed of in accordance with local laws and regulations.

65