Sharp XV-Z30000 appendix Custom Gamma,  Adjusting the Colors, Picker

Picture Adjustment (“Picture” Menu) (Continued)

7 Custom Gamma

The Custom Gamma function can be used when “Picture Mode” is set to “User1” or “User2”.

You can adjust the gamma curve and save your custom setting. Adjust it to suit the picture brightness.

1Press P/R to select “Custom

Gamma” on the gamma

adjustment screen, and then press Q.

Custom Gamma

Custom Gamma Off

Custom Gamma Edit

Reset

Return

SEL./ADJ.	ENTER
RETURN	END

2 Press P/R to select “On”.

3 Press R to select “Custom

Gamma Edit”, and then press

ENTER.

4Adjust the curve to adjust the image brightness.

•Press O/Q to adjust the white level. Select from 10 levels, from 5% to 80%.

•Press P/R to adjust the optical output value. Select a value from 0 to 100.

Custom Gamma
Custom Gamma	On
Custom Gamma Edit
Reset
Return

Output:
XX%
	Input:	XX%
SEL./ADJ.	ENTER
RETURN	END

Menu operation n Page 42

5Press ENTER to display the confirmation screen. Use P/R to

select “Save” and press ENTER.

6 To complete the Custom Gamma adjustment, select “Return” and press ENTER.

Adjusting the Colors

You can select the color of the projected image to correct and then adjust it to the desired color by setting “Hue”, “Saturation”, “Value”, and “Effect”.

Note

•Before performing this adjustment, prepare the image to be adjusted.

•You can perform this adjustment easier in the still image than in the moving image.

1 Select “C.M.S.1” or “C.M.S.2” (C.M.S.: Color Management

System) in the “Advanced” menu, and press Q.

•If there is no data for the stored corrected color, the color selection screen and the picker is displayed. (Go to step 2.)

Picker

46