Installation, cont’d
Final adjustments
1. | Turn on the audio source and any associated devices. |
| Adjust the source and device settings as desired to get the |
| optimum audio output for your speaker application. |
2. | To adjust the speaker angle insert the allen hex tool into |
| the locking access, loosen the hex cap screw, and adjust to |
| the desired angle (see figure 7). Tighten the hex cap screw |
| down about 6 to 8 turns clockwise, until snug, for the |
| speaker to sit securely in the desired position. |
Turn clockwise to tighten.
Figure 7 — Adjust speaker and lock in place
NAfter locking it into place, check that the speaker is secure and cannot be lifted from the wall mount assembly. If it does lift out, continue tightening the hex cap screw until it is no longer possible to lift the speaker from the assembly.
3. | Replace the Extron logo, pressing it firmly into place. |
NFor speaker details, specifications, troubleshooting tips, and service access information refer to the
SI 3 User's Guide supplied with the speakers, or online at www.extron.com
5
