Extron electronic WPB 109 Unbalanced Input, Unbalanced Output, Balanced Input or Output

Models: WPB 109

1 2
Download 2 pages 11.4 Kb
Page 2
Image 2
WPB 109 Wallplate • Installation Guide (Continued)

WPB 109 Wallplate • Installation Guide (Continued)

7.Connect the appropriate input or output devices to the front panel connectors.

8.Test the system and resolve any cabling or signal issues.

Cable Preparation For Audio Connections

The length of the exposed wires in the stripping process is critical.

 

 

 

 

7/8"

 

 

 

 

 

 

The ideal length is 3/16" (5 mm).

 

Heat

 

 

 

 

 

(22 mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/8"

 

 

 

 

 

 

• If the stripped section of wire is longer than 3/16", the exposed

Shrink

 

 

 

 

(3 mm)

 

 

 

 

wires may touch, causing a short circuit between them.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• If the stripped section of wire is shorter than 3/16", the wires can

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

be easily pulled out even if tightly fastened by the captive screws.

3/16" (5 mm) Max.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: Audio ground pins may be labeled as

 

 

 

 

 

 

 

 

 

Do not tin the wires!

 

 

 

or . The wiring and function are the same,

 

 

 

whichever way your product is labeled.

Tinned wire does not hold its shape and can become

 

 

 

 

 

loose over time.

 

 

 

 

 

 

 

 

 

 

 

 

Source

Reference

Tip Cable Preparation For Audio Connections

Sleeve The ideal length is 3/16" (5 mm).

RCA Connector

Tip wires may touch, causing a short circuit between them.

Ring Tip Do not tin the wires!

Sleeve loose over time.

TRS Connector

 

 

Tip (T)

 

S

Ring (R)

T

R

Sleeve (S)

3.5 mm Audio Jack

Unbalanced Audio

Wiring

Tip SourceUnbalanced Audio

Sleeve Unbalanced InputNO Ground Here

Tip

Left

Sleeve

Tip

Right

Sleeve

 

Unbalanced Input

Tip

NO Ground Here

Sleeve

Unbalanced Output CAUTION

For unbalanced audio, connect the sleeve(s) to the ground contact.

DO NOT connect the sleeve(s) to the negative (-) contacts.

Tip

Left

NO Ground Here

Sleeve(s)

 

Tip

Right

NO Ground Here

 

Unbalanced Output

Balanced Audio

Wiring

Tip Balanced AudioBalanced Input or Output

Ring Direct InsertionBalanced Mono Audio

Sleeve Unbalanced Stereo AudioManual background

Tip

Left

Ring

Sleeve(s)

 

Tip

Right

Ring

 

Balanced Input or Output

Direct Insertion

Captive Screw

Tip (T) Manual backgroundManual backgroundManual background

Ring (R) Manual backgroundManual backgroundManual background

Sleeve (S) Manual backgroundManual background

Balanced Mono Audio

(input or output)

Tip (T) = Left ChannelManual backgroundManual background

Ring (R) = Right ChannelManual backgroundManual background

Sleeve (S) Manual backgroundManual background

Unbalanced Stereo Audio

(input or output)

Extron Headquarters

Extron Asia

Extron China

Extron Korea

+1.800.633.9876 (Inside USA/Canada Only)

+65.6383.4400

+86.21.3760.1568)

+82.2.3444.1571

 

 

 

 

Extron Europe

Extron Japan

Extron Middle East

Extron India

+31.33.453.4040

+81.3.3511.7655

+971.4.299.1800

+91.80.3055.3777

 

 

 

 

© 2013 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com

2

68-1162-50

Rev. A 01 13

 

Page 2
Image 2
Extron electronic WPB 109 Unbalanced Input, Unbalanced Output, Balanced Input or Output, Balanced Mono Audio