Figure 3 - Flat roof installations
Flat roof installations
1.Locate the 11" (27.9 cm) dia. hole between rafters.
2.Build a sloping base that will mount the remote blower at a minimum pitch of
3.Weatherproof the base as required.
4.Locate the base so that the remote blower’s vent aligns with the 11" (27.9 cm) dia. hole and the blower sits evenly on the base with no gaps. Note: Make sure that the discharge end of the remote blower faces away from the direction of prevailing winds.
5.Use dimensions from either FIGURE 1 or 2 to locate the
wiring diagram
! | WARNING |
You can be killed or seriously injured if you don’t follow instructions.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
•Disconnect power before making electrical connection.
•Connect the ground wire to green ground screw in wiring box.
Failure to do so can result in death or electrical shock.
Make the duct & electrical connections
1.Remove the cover from the remote blower. Then remove the wiring box cover.
2.Pull electrical wiring through the hole in the blower base and secure it according to local codes.
3.Make the electrical connections. Connect the white and black wires of the power supply cable wire to the white and black wires in the wiring box with
Figure 4 - Electrical connections
4.Replace the wiring box cover and screws taking care not to pinch the wiring under the wiring box cover.
5.Turn on power (See Installation Instructions that came with your vent hood system). Check operation of blower and make sure damper is opening freely.
6.Reinstall remote blower housing.
Warranty & Service
All Faber products are warranteed against any defect in materials or work- manship for the original purchaser for a period of 1 year from the date of original purchase. This warranty covers labor and replacement parts. The warranty does not cover consumable parts such as filters and light bulbs. This warranty does not apply if this product has been subjected to faulty installation, misuse, or neglect. This warranty excludes any consequential expense or damage resulting from any use or malfunction of the product. All implied warranties are limited to the duration of this warranty.
To obtain warranty service, contact the dealer from whom you purchased the rangehood, or the local Faber distributor. If you cannot identify a local Faber distributor, contact us at (508)
Version 05/06 - Page 4
