Dimensional Diagrams
30” Ducted | 36” Ducted |
Ducted
1” min 21 10/16” max
22 1/16”
upper chimney
lower chimney
min & max ceiling height examples
x = 24" | x = 26" | x = 28" | x = 30" | |||||
7' | min | 7' | min | 8' | min |
| min | |
9 2/16" | 11 2/16" | 1 2/16" | 8' | 3 2/16 | ||||
max | 9' | max | max | 9' | max | |||
9' | 5 2/16" | 7 2/16" | 9' | 9 2/16" | 11 2/16" |
For ducted installations the chimneys are adjustable and designed to meet varying ceiling heights between 7’ 9 2/16” and 9’ 11 2/16” depending on the distance between the bottom of the hood and the cooktop (distance x in the ducted diagram).
9 7/16” |
| canopy | |
|
|
|
|
|
|
|
|
|
| 19” | |
| |||
x | x=distancefromhoodtocooktop | ||
(varies depending on installation) | |||
| min - 24”, suggested max - 30” | ||
|
| also consult cooktop | |
| manufacturer's recommendation |
36” | cabinet base |
|
For shorter ceilings, have the chimney cover(s) cut at a sheet metal shop. For higher ceiling installations, the High Ceiling Chimney Kit includes a new 39” upper chimney which would replace the 21 10/16” upper chimney that came with the hood.
Note: If 24” or 30” High Backsplash is being installed, the distance between the bottom of the hood and the cooktop (distance x in diagram) is equal to the height of the Backsplash.
Make your ductrun as straight and short as possible. The ductrun should not exceed 35 equivalent feet if ducted with the required minimum of 6” round duct. Count 45º angles as 3 feet, 90º elbows as 5 feet, and 90º flat elbows as 12 feet.
For best results, use no more than three 90° elbows. Make sure that there is a minimum of 24” of straight duct between elbows if more than one is used. Do not install two elbows together. If you must elbow right away, do it as far away from the hood’s exhaust opening as possible.
WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this rangehood.