•Remove the wiring box cover by removing the two screws.
•Disconnect the two red wires by removing the
•Remove the Internal Control Box by removing the the two phillips screws (item A) on the bottom of the rangehood.
•Close the hole using the cap provided in the Remote Wall Control package using the two screws.
•Remove the Electronic Board on the wiring box by removing the the two phillips screws.
red wires
from control
Electronic Board (to be removed)
from lamp
A
• Insert the cable with four wires (Brown, Black, Red and Green Ground Wire) from the Remote Wall Control into the knockout hole of the rangehood.
• Insert the 3 Remote Blower wires (Black, White and Green Ground Wire) into the knockout hole of the rangehood.
• Insert the power supply cable into the knockout hole of the rangehood.
•Connect the green ground wire from the power supply to the green ground screw.
• Connect the green ground wire from the Remote Wall Control to the unused green |
|
| remote |
| ||
ground screw. | white wiring | blower |
| |||
connectors |
| |||||
• Connect the green ground wire of the Remote Blower to the unused green ground | remote |
|
| conduit | violet wiring | |
|
|
|
| |||
|
|
|
|
| ||
screw. | wall |
|
|
|
| from |
• Connect the red wire from the Remote Wall Control with the red wire of Wiring | control |
|
|
|
| lamp |
Box with a | conduit |
|
|
|
|
|
Y/G |
|
|
|
|
| |
• Connect the brown wire from the Remote Wall Control with the black wire of the |
|
|
|
| brown wiring | |
remote |
|
|
|
| ||
Remote Blower cable with a | wall control |
|
|
|
|
|
• Connect the black wire from the Remote Wall Control with the black wire of the | Y/G |
|
|
|
|
|
power supply cable with a | remote |
|
|
|
|
|
• Connect together with a | blower |
|
|
|
|
|
- violet rangehood wire | Y/G |
|
| power |
|
|
- white wire of the power supply cable | supply |
|
| red wiring | ||
cable | black wiring | supply | ||||
- white wire of the Remote Blower cable. | conduit |
|
| |||
|
|
|
•Replace the wiring box cover. Tighten the screw securely.
•Replace the bottom of the rangehood and reinsert the grease Þlters.
•Reconnect the power
Twist on wire connector should be suitable for connecting multiple wires of different sizes together.