REMOTE WALL CONTROL INSTALLATION INSTRUCTIONS

WARNING – To reduce the risk of Þre, electric shock and injury to persons, the Remote Wall Control must be installed only with Faber range hood models INCA PRO 30 RB or INCA PRO 38 RB, that are marked to indicate suitability with this product. Other models cannot be used

READ AND SAVE THESE INSTRUCTIONS.

The Installer must leave these instructions with the homeowner.

The homeowner must keep these instructions for future reference and for local electrical inspectors’ use.

WARNING

Risk of electrical shock. Electrical wiring must be done by qualiÞed personnel in accordance with all applicable codes and standards. Turn off the power and lock out the service panel before installing, wiring, or servicing this product. To prevent serious injury from electrical shock or damage to electrical components - MAKE SURE POWER IS OFF! This unit must be grounded.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

a.Installation Work And Electrical Wiring Must Be Done By QualiÞed Person(s) In accordance With All Applicable Codes and Standards, Including Fire-Rated Construction.

b.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden wires.

MAKE YOUR CUT-OUTS.

WARNING

•Cut a level 4 11/32” X 3 5/32” hole in to your desired location.

•Route the electrical cable from the hood to the wall control location.

INSTALL THE REMOTE WALL CONTROL

WARNING – To reduce the risk of Þre and electric shock, do not use this control in an insulated wall

•Remove the back metalic panel of the Remote Wall Control by removing the four screws.

•Insert and Þx a cable with four wires (Brown, Black, Red and Green Ground Wire) into the knockout hole of the back metalic panel.

•Connect the green ground wire from the cable to the green ground screw.

•Connect the red wire from the cable to the red Remote Wall Control wire with a twist-on wire connector.

•Connect the brown wire from the cable to the white/black Remote Wall Control wire with a twist-on wire connector.

•Connect the black wire from the cable to the two black Remote Wall Control wires with a twist-on wire connector.

•Replace the back metalic panel.

The twist on wire connector should be suitable for connecting multiple wires of different sizes together.

•Remove the faceplate from the Remote Wall Control by removing two screws.

•Position the remote control box in a hole so that both face plate mounting tabs are ßush to the Þnished wall surface. Fasten it to a wall stud using four screws (not supplied)

•Reinstall the control faceplate, ensuring not to pinch the wires.

CONNECTION OF THE REMOTE WALL CONTROL TO THE RANGEHOOD

To install the rangehood, please refer to the hood installation instructions.

•Remove the grease Þlters USING TWO HANDS one to hold the Þlter so that it doesn’t fall on cooktop and one to turn the knob by pulling the knob out and turning to the left.

•Remove the entire bottom of the rangehood by pushing your thumbs into the side holes and pulling the sides free from the rangehood.

black wiring

Y/G wiring

white wiring brown wiring

red wiring

Page 1 Page 2
Page 1
Image 1
Faber INCA PRO 30 RB installation instructions Read and Save These Instructions, Make Your CUT-OUTS
Page 1 Page 2

INCA PRO 30 RB specifications

The Faber INCA PRO 30 RB is a standout kitchen appliance that seamlessly combines modern design with powerful performance. This stunning range hood is crafted to meet the needs of contemporary cooking environments while showcasing innovative technology and user-friendly features.

One of the defining characteristics of the Faber INCA PRO 30 RB is its sleek, minimalist design, which enhances any kitchen decor. Its stainless steel finish not only adds a touch of elegance but also ensures durability and ease of maintenance. The hood measures 30 inches, making it suitable for a wide range of kitchen configurations and cooking styles.

Among its key features is the powerful air extraction capability, engineered to effectively remove smoke, odors, and airborne grease particles from your kitchen. The INCA PRO is equipped with a robust motor that provides various speed settings, allowing users to select the optimal airflow for their cooking needs. This versatility ensures that any culinary creation, from delicate sauces to hearty stir-fries, can be prepared without compromising the air quality in the kitchen.

The hood operates quietly, a crucial feature for those who often entertain or have open-concept living spaces. With noise levels designed to remain low, the Faber INCA PRO 30 RB allows for comfortable conversations and a relaxed cooking environment.

Another notable technology featured in the INCA PRO is the easy-to-use control panel. This intuitive interface facilitates quick adjustments and setting changes, ensuring you focus on cooking rather than fussing with complex controls. Additionally, the hood is equipped with energy-efficient LED lighting, providing excellent visibility over your cooking area while minimizing energy consumption.

The Faber INCA PRO 30 RB also incorporates advanced filter technology, featuring dishwasher-safe baffle filters that are easy to maintain. These filters not only enhance the hood's efficiency but also ensure straightforward cleaning, promoting a hygienic kitchen environment.

With its combined features of powerful airflow, quiet operation, and easy maintenance, the Faber INCA PRO 30 RB is an ideal choice for both professional chefs and home cooking enthusiasts. This range hood is designed to elevate the cooking experience while ensuring that your kitchen remains a welcoming space, free from unwanted odors and smoke. Whether you're preparing a weekday meal or hosting a dinner party, the INCA PRO will undoubtedly become an essential part of your culinary toolkit.
Top Page Image Contents