REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the
1 parallel position and turn it over.
2 Use a screwdriver to loosen the screws on the bottom plate.
3 Lift the bottom plate off.
Loosen Screws
REATTACHING THE BOTTOM PLATE
Insert the projection on the bottom plate | Tighten the screws by using a |
1 into the groove on the nozzle housing | 2 screwdriver. |
and set the bottom plate in place. |
|
Bottom Plate
Projection
Groove
Turn the vacuum over
3 and place in the upright position.
Tighten Screws
14