GETTING TO KNOW YOUR HAND VACUUM
Debris Screen | HEPA Filter |
|
|
| 12 |
1. | On/Off Switch | 7. | Flexible Hose |
2. | Dust Cup (Container) | 8. | Crevice Brush |
3. | Dust Cup Release Button | 9. | Oval Dusting Brush |
4. | Exhaust Filter Cover (x2) | 10. | Pet Hair Removal Attachment |
5. | Handle | 11. | Shoulder Strap |
6. | Suction Hole | 12. | HEPA Filter |
Technical Specifications
Voltage: | 120V., 60Hz. |
Power: | 6.67 Amps, 800 Watts |
Illustrations may differ from actual product.
2
TROUBLE SHOOTING GUIDE
PROBLEM |
| POSSIBLE REASON | POSSIBLE SOLUTION | ||
|
|
|
|
| |
| 1. | Power cord not firmly plugged | 1. | Plug unit in firmly. | |
| 2. | Check fuse or breaker. | |||
HAND VACUUM |
| into outlet. | |||
|
| Replace fuse/reset breaker. | |||
WILL NOT | 2. | No power in wall outlet. |
| ||
3. | Call | ||||
OPERATE | 3. | Needs servicing. | |||
4. | Turn the unit off and unplug | ||||
| 4. | Thermostat has tripped. | |||
|
| from outlet. Allow to cool. | |||
|
|
|
| ||
|
|
|
|
| |
|
|
| 1. | Empty dust cup – | |
|
|
| 2. | (see page 5). | |
HAND VACUUM | 1. | Dust cup is full. | Turn unit off and unplug from | ||
| wall outlet. Remove HEPA | ||||
WILL NOT | 2. | Unit clogged. |
| Dust Cup Filter and check for | |
OR SUCTION | 3. | HEPA Dust Cup Filter needs |
| object(s) in air duct and | |
POWER IS WEAK |
| cleaning or replacing. | 3. | remove. | |
|
|
| Clean or replace HEPA Dust | ||
|
|
|
| Cup Filter. | |
|
|
|
| (see page 5) | |
|
|
|
|
| |
| 1. | Dust cup is full. | 1. | Empty dust cup. | |
| 2. | Review HEPA Dust Cup Filter | |||
DUST ESCAPING | 2. | HEPA Dust Cup Filter is not | |||
| instructions. | ||||
FROM HAND |
| installed correctly. |
| ||
|
| (see page 5) | |||
VACUUM | 3. | There is a puncture/hole in |
| ||
3. | Replace HEPA dust cup filter. | ||||
|
| HEPA Dust Cup Filter. | |||
|
|
| (see page 5) | ||
|
|
|
| ||
|
|
|
| ||
HAND VACUUM | 1. | Hose clogged. | 1. Remove hose and/or bushes. | ||
HOSE OR |
| Remove obstruction from | |||
BRUSHES WILL | 2. | Dust cup is full. |
| hose. | |
NOT |
|
| 2. Empty and clean dust cup. |
ORDERING REPLACEMENT FILTERS
TO ORDER REPLACEMENT HEPA FILTERS
FOR MODEL FM405
Style # XFM405 – HEPA Filter Only
Call: | 1 (800) |
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
or
visit our website: www.fantom.com
FOR TECHNICAL SUPPORT
for Models FM405
Call: | 1 (800) |
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note: After each Use - Always remove the Filter Debris Screen from the HEPA Dust Cup Filter, then vigorously “TapClean” HEPA Filter until no more dust can be removed. Filter should be rinsed and completely dried at least once a month or when suction appears reduced.
To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse under a tap until all observable dirt has been removed. Some discoloration of the HEPA filter material may occur, this is normal and will not affect the filter's performance. When finished, shake off excess water. Do NOT wash in dishwasher.
It is important that when you wash the HEPA dust cup filter, you allow it to dry COMPLETELY before using again. We recommend 24 hours to air dry. DO NOT DRY IN DRYER.
7