Fantom Vacuum FM430K Getting To Know Your Hand Vacuum, Trouble Shooting Guide, Problem

GETTING TO KNOW YOUR HAND VACUUM

14

TROUBLE SHOOTING GUIDE

PROBLEM		POSSIBLE REASON	POSSIBLE SOLUTION
	1.	Power cord not firmly plugged	1.	Plug unit in firmly.
			2.	Check fuse or breaker.
HAND VACUUM		into outlet.
				Replace fuse/reset breaker.
WILL NOT	2.	No power in wall outlet.
			3.	Call 1-800-275-9251.
OPERATE	3.	Needs servicing.
			4.	Turn the unit off and unplug
	4.	Thermostat has tripped.
				from outlet.
			1.	Allow unit to cool down,
				then Restart. Empty dust
			2.	cup – (see page 5).
HAND VACUUM	1.	Dust cup is full.		Turn unit off and unplug
				from wall outlet. Remove
WILL NOT PICK-UP	2.	Unit clogged.
				HEPA Dust Cup Filter and
OR SUCTION	3.	HEPA Dust Cup Filter needs
				check for object(s) in air
POWER IS WEAK		cleaning or replacing.
				duct and remove.
			3.
				Clean or replace HEPA
				Dust Cup Filter.
				(see page 5)
	1.	Dust cup is full.	1.	Empty dust cup.
			2.	Review HEPA Dust Cup
DUST ESCAPING	2.	HEPA Dust Cup Filter is not
				Filter instructions.
FROM HAND		installed correctly.
				(see page 5)
VACUUM	3.	There is a puncture/hole in
			3.	Replace HEPA dust cup
		HEPA Dust Cup Filter.
				filter. (see page 5)
HAND VACUUM	1.	Hose clogged.	1.	Remove hose and/or
HOSE OR				brushes. Remove
BRUSHES WILL	2.	Dust cup is full.		obstruction from hose.
NOT PICK-UP			2. Empty and clean dust cup.

1.	Brush Safety Cover	8.	Main Unit
2.	On/Off Switch	9.	Brush Chamber Exhaust Port
3.	Dust Cup Release Button	10.	Hepa Filter
4.	Hose Clip	11.	Debris Screen
5.	Flexible Hose	12.	Filter Chamber
6.	Dusting Brush	13.	Cover Release Button
7.	Dust Cup	14.	Crevice Tool

Technical Specifications

Voltage:	120V., 60Hz.
Power:	6.67 Amps, 800 Watts

2 7