![TROUBLESHOOTING](/images/new-backgrounds/51126/5112633x1.webp)
|
|
|
|
| |
TROUBLESHOOTING |
|
| |||
If there is a problem with the vacuum cleaner, carry out the following checks | |||||
to find the cause. If the problem still persists after the checks have been made, | |||||
do not use the vacuum cleaner to prevent the possibility of an accident occurring. | |||||
Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the | |||||
wall outlet, and contact FANTOM Customer Service at | |||||
Or visit our website at www.fantom.com |
|
| |||
|
|
|
| ||
Problem |
| Cause | Remedy | ||
The motor does not operate | The | power cord plug is not | Insert the power | cord plug | |
when the ON/OFF switch is | securely inserted into the | securely into the | wall | ||
set to the "ON" position. | wall outlet. | ||||
outlet.(refer to page 5 ) | |||||
|
|
| |||
|
|
|
| ||
Suction force is weak. | The dust compartment is full. | Empty the dust compartment. | |||
| (refer to page 9) |
| |||
| The | suction hose is blocked. | Remove the blockage. | ||
| (refer to page 11) |
| |||
|
|
|
| ||
| The | nozzle head is blocked. | Remove the blockage. | ||
| The | filters are dirty. | (refer to page 11) |
| |
| Clean the filters. |
| |||
| The | nozzle air inlet pipe is | (refer to page 10) |
| |
| Remove the blockage. | ||||
| blocked. | ||||
| (refer to page 11) |
| |||
The agitator does not | The | flat belt is worn or | Replace the flat belt. | ||
operate. | broken. | (refer to page 13 ) |
| ||
|
|
|
|
|
TO ORDER REPLACEMENT FILTERS CALL 1-800-275-9251
E/FRA
16