REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the
1 parallel position and turn it over.
Slide the latch in the direction | Latch |
2 of the arrow. |
|
Remove the bottom plate by pulling
3 the tabs as illustrated.
Pull here
Bottom Plate
REATTACHING THE BOTTOM PLATE
Insert the projection on the bottom plate 1 into the groove on the nozzle head
and set the bottom plate in place.
Bottom Plate
Projection
Groove
2 Push the bottom plate as shown.
Press
Press 
3 | Slide the latch in the direction shown. | Turn the vacuum over and place in the |
| 4 upright position. |
Latch
Nozzle Head
Height Adjustment Lever
14
