REPLACEMENT INSTRUCTIONS
Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the power cord from the wall outlet before replacing any of the parts below.
REPLACING THE HEADLIGHT LAMP
1 Set the vacuum cleaner to the parallel position.
2 Loosen the screws to remove the lens. | Headlight Lamp |
When removing the headlight lamp, be careful | Lens |
3 not to pull on the headlight lamp wiring. |
|
| Screw |
Remove the lamp by pushing it gently in 4 the direction of the arrow and then turning
it counterclockwise.
Socket Lamp
Push a new lamp gently into the socket and 5 turn it clockwise to tighten it .
Use a standard bayonet base appliance lamp
rated at 120V and 15W (LAMP MAX.15W).
Socket
Caution: Be careful not to clamp the headlight lamp wiring.
6 Reattach the lens and fasten the screws.
12
