Vanguard Heating VMH10TN Technical, Service, Hints, Replacement, Parts, SPECIFICATIONS Input Rate

TECHNICAL	You may have further questions about installation, operation, or troubleshooting.
	If so, contact DESA International’s Technical Service Department at 1-800-323-5190.
SERVICE
SPECIFICATIONS Input Rate		10,000 Btu/Hr
	Type Gas	Natural Only
	Ignition	Piezo
	Pressure Regulator Setting	3" W.C.
	Inlet Gas Pressure (in. of water) *
	Maximum	10.5"
	Minimum	5"
	Dimensions, Inches (H x W x D)	257/8 x 2613/16 x 93/8
	Fireplace (including hood and screws)
	Carton	325/8 x 273/16 x 115/8
	Weight, pounds	441/2 lbs.
	Fireplace
	Shipping	48 lbs.
	* For purposes of input adjustment
SERVICE	When gas pressure is too low
	• pilot will not stay lit
HINTS
	• burner will have delayed ignition
	• fireplace will not produce specified heat
	When gas quality is bad
	• pilot will not stay lit
	• burner will produce flames and soot
	• fireplace will backfire when lit
	You may feel your gas pressure is too low or gas quality is bad. If so, contact your
	local natural gas supplier.
REPLACEMENT	Note: Use only original replacement parts. This will protect your warranty coverage
	for parts replaced under warranty.
PARTS	Parts Under Warranty
	Contact authorized dealers of this product. If they can’t supply original replacement
	part(s) call DESA International’s Technical Service Department at 1-800-323-5190
	for referral information.

When calling DESA International, have ready

•your name

•your address

•model number of your fireplace

•how fireplace was malfunctioning

•type of gas used (propane/LP or natural gas)

•purchase date

Usually, we will ask you to return the defective part to the factory.

Parts Not Under Warranty

Contact authorized dealers of this product. If they can’t supply original replacement part(s) call DESA International’s Parts Department at 1-800-972-7879 for referral information.

When calling DESA International, have ready

•model number of your fireplace

•the replacement part number

28

103670