OPERATING INSTRUCTIONS
GETTING TO KNOW YOUR LEAF BLOWER
How to Attach the Extension Cord
NOTE: DO NOT use an extension cord over 150 feet long.
1.Use only with a 2 conductor extension cord intended for outdoor use with a polarized plug, with one blade larger than other, UL listed.
2.Form a loop with the extension cord. (Fig 11)
Fig. 11
3.Slip loop through power cord guide. (Fig 12)
Power Cord
Guide
Fig. 12
Power Cord
Hook
4.Latch loop of power cord onto hook. (Fig. 12)
5.Insert the plug of the leaf blower into the outlet on the extension cord. (Fig. 13)
How to Use the Power Switch WARNING: If you do not fully seat the extension cord on the inlet
plug, the loose plug could lead to overheating and cause a fire, or electrical shock.
Ensure that you fully seat the cord on the plug and use the cord lock feature to secure the cord.
IMPORTANT: Check the power cord frequently during use for holes in the insulation or other damage. DO NOT use a damaged cord.
DO NOT run the cord through standing water or wet grass.
The leaf blower is equipped with a two way On/Off switch. (Fig. 14) ‘O’ is OFF. ‘I’ is for “ON”.
ON
OFF
Fig. 14
1. | On/Off Switch | 7. | Vacuum Bag Hook |
2. | Latch Support | 8. | Vacuum Collector Bag |
3. | Blower/Vacuum Tube | 9. | Blower/Vacuum Selection Lever |
4. | Vacuum Inlet | 10. | Air Vents |
5. | Blower Outlet | 11. | Handle |
6. | Guide Wheel | 12. | Shoulder Strap |
* Illustrations may differ from actual product.
Fig. 13
8
Technical Specifications
Voltage: | 120V., 60Hz. |
Current: | 12 Amps. |
Use of ear protection is recommended when using this unit.
5
