Fantom Vacuum VPW46H Using the Adjustable Fan Jet lance, Using the High Pressure Lance

Models: VPW46H

1 6
Download 6 pages 31.67 Kb
Page 5
Image 5
Using the Adjustable Fan Jet lance

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

CAUTION

When you wish to stop using the pressure washer temporarily, make sure that the safety lock has been engaged to avoid any accidental operation. (Fig. 12)

Fig. 12

Safety

Lock

 

Using the Adjustable Fan Jet lance

The angle of the water on the fan jet lance may be adjusted between 0° and 60° by turning the nozzle adjuster counter-clockwise for a wider angle or clockwise for a narrower angle. (Fig. 13 & Fig. 14) Always make sure that the "On/Off' switch is in the "Off" position before changing the angle of the water jet. It is also recommended that the trigger gun safety lock be engaged as well. The adjustable fan jet lance allows you to use any variety of spray pattern from a full fan spray to a direct stream spray. When using the pressure washer to clean wood decks, siding, vehicles, etc., always start using the fan spray and begin spraying from a minimum 36" away to avoid damaging the surface of the material that you are cleaning. Always clear the area that you will be cleaning of people, pets and objects.

Fig. 13

Fig. 14

Counter-clockwise Clockwise

Using the High Pressure Lance

The high pressure lance is capable of cleaning most areas around the garden or on building work but using detergent is useful when cleaning automobiles or other painted finishes.

Using Brush With the Trigger Gun

The brush is used with the trigger gun. Push the brush onto the trigger gun nozzle and turn clockwise to lock as you would for the lances. (Fig. 15) the brush may be used for washing cars, boats, windows and other similar items. The brush operates at open orifice pressure so it will not direct a stream of water.

Fig. 15

Using the Drain Snake With the Trigger Gun

The drain snake is used with the trigger gun to help clean blockages in sewer/waster piping by the use of a high pressure water jet and turbulence. Attach the drain snake onto the trigger gun nozzle and turn clockwise to lock as you would for the lances. (Fig. 16)

Fig. 16

Use only on plastic schedule 40 pipe, minimum 4” diameter, ceramic pipe or cast iron pipe. NOT TO BE USED

INDOORS. OUTDOOR USE ONLY.

WARNING

Do NOT leave the drain snake unattended while connected to the pressure washer.

CAUTION

Introduce nozzle into pipe opening before pulling trigger. Do NOT apply water pressure when drain snake is not in pipe. Whip effect may cause serious injury to operator or bystander.

Using Detergent with the Pressure Washer

We recommend using the brush or the adjustable fan jet lance when you wish to use the detergent with your pressure washer. To use the adjustable fan jet lance, hold the lance in your hand and pull out the front part of the nozzle. (Fig. 17)

Add detergent to the detergent tank and insert the feed tube into the detergent tank through the removable detergent tank lid. Make sure that the feed tube goes all the way to the bottom of the detergent tank.

If you do not need to use detergent, remove the feed tube from the

detergent tank.

Pull Out

Fig. 17

 

Suitable Use of Your Pressure Washer

This high pressure washer is suitable for non-professional use. The working temperature must range between 40°F and 120 °F. The machine is supplied with a trigger gun, equipped with a trigger handle to offer a comfortable working position.

The high pressure washer is suitable for washing with cold water only. The water that you use for the pressure washer must not be dirty, sandy or contain any corrosive chemical products.

The pressure washer may be used to wash shutters, doors, tiles, cars, decks, campers, etc., where high water pressure is necessary to remove dirt.

With the detergent tank, the pressure washer can be used to apply a thick coating of aerated detergent to the areas being cleaned .

When using the pressure washer we recommend the use of personal safety items to reduce the risk of accidental injury.

Unpacking Your Pressure Washer

After you open the package, check to make sure that all the parts are in the box as per parts that are illustrated on page 3 of this guide. Due to transport and packing restraints, some accessories may be supplied unassembled; in this case follow the assembly instructions in this manual. If you have any questions, call FANTOM customer service at 1-800- 798-7398. Keep all small and potentially harmful parts of the packaging (plastic bags, foamed polystyrene, nails, etc.) out of the reach of children.

Correct Use of the Pressure Washer

Place the pressure washer in a safe area and on a horizontal surface.

When using the pressure washer, hold the trigger gun firmly with one hand on the handle and the other on the lance. (Fig. 1)

Fig. 1

NEVER point the water jet at electric wiring, at the pump unit, or at any person or animal.

7

4

Page 5
Image 5
Fantom Vacuum VPW46H Using the Adjustable Fan Jet lance, Using the High Pressure Lance, Using Brush With the Trigger Gun