Farenheit Technologies TID-360, TID-360T TV OPERATIONS [For TID-360T only]

Page - 19

z You should not write non-MP3 files or unneeded folders along with MP3 files on the disc

otherwise it takes a long time until the unit starts to play MP3 files.

z With some CD-R or CD-RW media, data may not be properly written depending on its

manufacturing quality. In this case, data may not be reproduced correctly. High quality CD-R or

CD-RW disc is recommended.

z Up to 16 characters are displayed for the name of an Album or a Track. ID3TAG version 1.x is

required.

z Note that the unit may not play Tracks in the order that you wrote them to the disc.

TV OPERATIONS [For TID-360T only] [[

1. Connect TV antenna, and then press MODE button to select TV mode.

2. In TV mode, press the MENU button once to enter TV menu setting.

3. Press the / buttons to select one of the setup pages: Auto program => Manual program.

4. Press OK button on front panel or ENTER button on remote control to enter the page.

5. Press the / buttons to select the setting.

6. Press OK button on front panel or ENTER button on remote control again to confirm, press

MENU to return to settings list.

TV MENU

Auto program (Auto seek mode)

System

Select this menu item to set TV video system: NTSC=>PAL, press OK button on front panel or

ENTER button on remote control to select.

Audio

Select this menu item to set the TV sound system: AUDIO1=> AUDIO2=> AUDIO3, press OK

button on front panel or ENTER button on remote control to select.

Select this menu item is to start searching and storing stations automatically.

Manual program (manual seek mode)

Storage

Select this menu item to set the storage number.

System

Select this menu item to set TV video system: NTSC=>PAL, press OK button on front panel or

ENTER button on remote control to select.

Audio

Select this menu item to set the TV sound system: AUDIO1=> AUDIO2=> AUDIO3, press OK

button on front panel or ENTER button on remote control to select.

Channel

Select this menu item is to set your desired searching channel, press cursor left/right buttons on

remote control to select one.

Fine

Select this menu item is to fine TV picture and sound until it achieves the best quality, press cursor

left/right buttons on remote control to adjust.

Memory

Select memory on or off is to set whether memory the searched station or not, press press OK

button on front panel or ENTER button on remote control to select.

Notes:

TV cannot be displayed on the additional monitor.